Production Development Design and Operation of Production Systems
The need for developing the area of industrial production is greater than ever, both for individual manufacturing companies and for national industries as a whole in the fight to maintain competitiveness in a global market. Outsourcing is not the only ans
- PDF / 4,918,307 Bytes
- 345 Pages / 439.37 x 666.142 pts Page_size
- 69 Downloads / 337 Views
Monica Bellgran • Kristina Säfsten
Production Development Design and Operation of Production Systems
123
Monica Bellgran, Dr. Haldex AB Biblioteksgatan 11 SE-103 88 Stockholm Sweden [email protected]
Kristina Säfsten, Dr. Jönköping University School of Engineering SE-551 11 Jönköping Sweden [email protected]
ISBN 978-1-84882-494-2 e-ISBN 978-1-84882-495-9 DOI 10.1007/978-1-84882-495-9 Springer London Dordrecht Heidelberg New York British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Control Number: 2009939259 © Springer-Verlag London Limited 2010 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing of the publishers, or in the case of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers. The original edition of this book was published in Swedish by Studentlitteratur as Produktionsutveckling – Utveckling och drift av produktionssystem. © Studentlitteratur, Lund, 2005 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant laws and regulations and therefore free for general use. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made. Cover design: eStudioCalamar, Figueres/Berlin Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Acknowledgements
We are grateful to the following for permission to reproduce copyright material: Fig. 1.1, line drawing in Sect. 1.2.4, line drawing in Sect. 1.3.1, Fig. 5.13, Fig. 5.14, Fig. 5.15, Fig. 8.2, Fig. 8.12, Fig. 8.18, Fig. 10.7, and Fig. 12.1 are reprinted by permission from the originator Mario Celegin; Fig. 1.2 from Crossfunctional co-operation and networking in industrial settings, Royal Institute of Technology, Stockholm, Copyright © 2002 (Gabrielsson 2002) is reprinted by permission from the originator Åsa Gabrielsson; Fig. 2.2 from Theory of Technical Systems, Springer-Verlag, Berlin, Copyright © 1988 (Hubka and Eder 1988), is reprinted by permission from Springer-Verlag GmbH, Heidelberg; Fig. 2.3 from Robotics and Computer Integrated Manufacturing Vol. 3, No. 2, Decision support in design and optimization of flexible automated manufacturing and assembly, Copyright © 1987 (Seliger et al. 1987) is reprinted by permission from Elsevier; Fig. 2.7 from Från Taylor till Toyota, Studentlitteratur, Lund, Copyright © 2000 (Sandkull and Johansson 2000) is reprinted by
Data Loading...
