Fault-Tolerant Computing with Heterogeneous Hardening Modes
Fault-tolerance using (full-scale) redundancy-based techniques has been employed to detect and correct reliability errors (i.e., soft errors), but they pose significant area and power overhead. On the other hand, due to the masking and the error tolerance
- PDF / 27,367,204 Bytes
- 606 Pages / 439.42 x 683.15 pts Page_size
- 9 Downloads / 185 Views
Jörg Henkel Nikil Dutt Editors
Dependable Embedded Systems
Embedded Systems Series Editors Nikil Dutt, Irvine, CA, USA Grant Martin, Santa Clara, CA, USA Peter Marwedel, Informatik 12, TU Dortmund, Dortmund, Germany
This Series addresses current and future challenges pertaining to embedded hardware, software, specifications and techniques. Titles in the Series cover a focused set of embedded topics relating to traditional computing devices as well as hightech appliances used in newer, personal devices, and related topics. The material will vary by topic but in general most volumes will include fundamental material (when appropriate), methods, designs and techniques.
More information about this series at http://www.springer.com/series/8563
J¨org Henkel • Nikil Dutt Editors
Dependable Embedded Systems
Editors J¨org Henkel Karlsruhe Institute of Technology Karlsruhe, Baden-W¨urttemberg, Germany
Nikil Dutt Computer Science University of California, Irvine Irvine, CA, USA
ISSN 2193-0155 ISSN 2193-0163 (electronic) Embedded Systems ISBN 978-3-030-52016-8 ISBN 978-3-030-52017-5 (eBook) https://doi.org/10.1007/978-3-030-52017-5 © The Editor(s) (if applicable) and The Author(s) 2021. This book is an open access publication. Open Access This book is licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made. The images or other third party material in this book are included in the book’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the book’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
To Wolfgang, our inspiring colleague, co-initiator of the SPP 1500 pr
