Recent developments of advanced numerical heat transfer in porous media
- PDF / 475,861 Bytes
- 3 Pages / 595.276 x 790.866 pts Page_size
- 86 Downloads / 223 Views
Recent developments of advanced numerical heat transfer in porous media Qingang Xiong1 · Majid Siavashi2 · Mohammad Hossein Doranehgard3 · Mohaddeseh Mousavi Nezhad4
© Akadémiai Kiadó, Budapest, Hungary 2020
Guest Editors
Prof. Qingang Xiong National & Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, Huaiyin Institute of Technology, China [email protected]
Mohammad Hossein Doranehgard Department of Civil and Environmental Engineering, University of Alberta, Canada [email protected]
Prof. Majid Siavashi
School of Mechanical Engineering, Iran University of Science and Technology, Iran [email protected]
Prof. Mohaddeseh Mousavi Nezhad School of Engineering, University of Warwick , Coventry, UK
[email protected]
This compilation is based on the peer-reviewed and selected papers of Adv-Num-Thermo-Poro.
13
Vol.:(0123456789)
Q. Xiong et al.
Preface Porous structures are widely encountered in almost all disciplines of science and engineering. Heat transfer is one of the critical topics in research and application of porous media. Due to such inherently pseudo-continuous characteristic, thermal transport in porous media exhibits many novel behaviors which are usually absent in non-porous media. In the last decades, numerical simulation has been increasingly employed in the scientific investigation and practical application of heat transfer in porous media. This Special Issue provides a top-notch platform for researchers in the area of numerical heat transfer to report their most up-to-date high-quality progress and highlight the possible future directions from their professional insights. Theoretical derivation, model development, engineering application, and experimental validation on advanced numerical heat transfer in porous media from nano- to environmental scales have been majorly covered in this Special Issue. Following the Call for Papers in July 2019, about 90 papers have been submitted to be considered for possible publication in this Special Issue. All papers were reviewed
* Majid Siavashi [email protected] Qingang Xiong [email protected] Mohammad Hossein Doranehgard [email protected] Mohaddeseh Mousavi Nezhad M.Mousavi‑[email protected] 1
National and Local Joint Engineering Research Center for Mineral Salt Deep Utilization, Key Laboratory for Palygorskite Science and Applied Technology of Jiangsu Province, Huaiyin Institute of Technology, Huai’an, China
2
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran
3
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Canada
4
School of Engineering, University of Warwick, Coventry, UK
13
by at least two reviewers, and the accepted papers were recommended for publication. Finally, about 45 manuscripts have been accepted to be published in this Special Issue. The accepted manuscripts cover a wide range of applications of numerical
Data Loading...
