Reduced Modelling of Planar Fuel Cells Spatial Smoothing and Asympto
This book focuses on novel reduced cell and stack models for proton exchange membrane fuel cells (PEMFCs) and planar solid oxide fuel cells (P-SOFCs) that serve to reduce the computational cost by two orders of magnitude or more with desired numerical acc
- PDF / 12,614,587 Bytes
- 306 Pages / 453.543 x 683.15 pts Page_size
- 38 Downloads / 187 Views
ced Modelling of Planar Fuel Cells Spatial Smoothing and Asymptotic Reduction
Reduced Modelling of Planar Fuel Cells
Zhongjie He Hua Li Karl Erik Birgersson •
•
Reduced Modelling of Planar Fuel Cells Spatial Smoothing and Asymptotic Reduction
123
Karl Erik Birgersson Department of Chemical and Biomolecular Engineering National University of Singapore Singapore Singapore
Zhongjie He Energy Research Institute at NTU Nanyang Technological University Singapore Singapore Hua Li School of Mechanical and Aerospace Engineering Nanyang Technological University Singapore Singapore
ISBN 978-3-319-42645-7 DOI 10.1007/978-3-319-42646-4
ISBN 978-3-319-42646-4
(eBook)
Library of Congress Control Number: 2016956628 © Springer International Publishing Switzerland 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Dedicated to my parents and my wife, Mrs Qianpian Zhang, for their constant support Zhongjie He Dedicated first and foremost to my motherland, and to Duer, Anne and my parents Hua Li Dedicated to my family. Karl Erik Birgersson
Foreword
It is my great pleasure to write the foreword to this monograph. Since the authors informed me that they planned to write a book about reduced modelling methods for planar fuel cells, I have looked forward to its completion with great anticipation. This summarizes their extraordinary contributions in the area of fuel cell modelling. I believe this book will be of great value to both experts and those with a casual interest in fuel cell modelling, model reduction, sensitivity analysis, and fuel cell design within academia and industry. The three authors are among the most outstanding scientists in the world in the area of fuel cell modelling. Fuel cell is an electrochemical energy conversion device for environmentally f
Data Loading...
