Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 6
Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 6 of the Proceedings of the 2019 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the sixth volume of six from the Conference, brings togethe
- PDF / 13,114,520 Bytes
- 167 Pages / 595.35 x 807.87 pts Page_size
- 17 Downloads / 147 Views
Antonio Baldi · Sharlotte L. B. Kramer Fabrice Pierron · John Considine · Sven Bossuyt Johan Hoefnagels Editors
Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 6 Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics
Conference Proceedings of the Society for Experimental Mechanics Series Series Editor Kristin B. Zimmerman Society for Experimental Mechanics, Inc. Bethel, CT, USA
The Conference Proceedings of the Society for Experimental Mechanics Series presents early findings and case studies from a wide range of fundamental and applied work across the broad range of fields that comprise Experimental Mechanics. Series volumes follow the principle tracks or focus topics featured in each of the Society's two annual conferences: IMAC, A Conference and Exposition on Structural Dynamics, and the Society's Annual Conference & Exposition and will address critical areas of interest to researchers and design engineers working in all areas of Structural Dynamics, Solid Mechanics and Materials Research. More information about this series at http://www.springer.com/series/8922
Antonio Baldi • Sharlotte L. B. Kramer • Fabrice Pierron John Considine • Sven Bossuyt • Johan Hoefnagels Editors
Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 6 Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics
Editors Antonio Baldi Department of Mechanical, Chemical and Materials Engineering University of Cagliari Cagliari, Sardinia, Italy Fabrice Pierron University of Southampton Southampton, Hampshire, UK Sven Bossuyt Advanced Manufacturing and Materials group Aalto University Aalto, Finland
Sharlotte L. B. Kramer Sandia National Laboratories Albuquerque, NM, USA John Considine Forest Products Laboratory USDA, Forest Service Madison, WI, USA Johan Hoefnagels Eindhoven University of Technology Eindhoven, NB, Netherlands
ISSN 2191-5644 ISSN 2191-5652 (electronic) Conference Proceedings of the Society for Experimental Mechanics Series ISBN 978-3-030-30097-5 ISBN 978-3-030-30098-2 (eBook) https://doi.org/10.1007/978-3-030-30098-2 © Society for Experimental Mechanics, Inc. 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this b
Data Loading...
