Review of Analytical Mechanics
This chapter treats simple structural members based on two different analytical approaches. On the one hand based on fundamental equations of continuum mechanics, i.e., the kinematics, the equilibrium and the constitutive equation, the describing partial
- PDF / 9,065,394 Bytes
- 273 Pages / 453.543 x 683.15 pts Page_size
- 63 Downloads / 238 Views
A Project-Based Introduction to Computational Statics Second Edition
A Project-Based Introduction to Computational Statics
Andreas Öchsner
A Project-Based Introduction to Computational Statics Second Edition
123
Andreas Öchsner Faculty of Mechanical Engineering Esslingen University of Applied Sciences Esslingen am Neckar, Baden-Württemberg Germany
ISBN 978-3-030-58770-3 ISBN 978-3-030-58771-0 https://doi.org/10.1007/978-3-030-58771-0
(eBook)
1st edition: © Springer International Publishing AG 2018 2nd edition: © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2021 This work is subject to copyright. All rights are solely and exclusively licensed by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Persönlichkeiten werden nicht durch schöne Reden geformt, sondern durch Arbeit und eigene Leistung. Albert Einstein (1879–1955)
Preface to the Second Edition
The pedagogical methodology proposed in the first edition has been well accepted by students and the scientific community. The second edition has been extended by more than 40 pages. Many additional examples on the refined analysis and different modifications of extensometers have been included. Last but not least, the entire content and the graphical illustrations have been thoroughly revised and updated. Esslingen, Germany July 2020
Andreas Öchsner
vii
Preface to the First Edition
This book presents a novel concept for introducing the finite element method, applied in the context of solid mechanics. It presents a major conceptual shift, i.e., taking away lengthy theoretical derivations from the face-to-face interaction with students, focusing on the summary of key equations and concepts, and to practice these on well-chosen example proble
Data Loading...