Serrated grain boundary formation during high temperature fatigue
- PDF / 896,172 Bytes
- 3 Pages / 594 x 774 pts Page_size
- 48 Downloads / 173 Views
.
The preparation o f this D i s c u s s i o n was supported through a grant from the National S c i e n c e F o u n d a t i o n to the C M U C e n t e r for the Study o f Materials through Grant D M R - 8 1 19507. Appreciation is expressed to Dr. David A. Smith of the I B M T . J . Watson Research C e n t e r for valuable discussions and suggestions, and to Dr. K . B . A l e x a n d e r for providing F i g u r e 1 and Mr. G. Spanos for furnishing Figure 2.
REFERENCES 1. H.I. Aaronson, C. Laird, and K.R. Kinsman: Phase Transformations, ASM, Metals Park, OH, 1970, p. 313. 2. H.I. Aaronson: The Mechanism of Phase Transformations in Crystalline Solids, Institute of Metals, London, UK, 1969. p. 270. 3. H.I. Aaronson, J. K. Lee, and K. C. Russell: Precipitation Processes in Solids, TMS-AIME, Warrendale, PA, 1978, p. 31. 4. C. Laird and H.I. Aaronson: Acta Metall., 1969. vol. 17, p. 505. 5. C.M. Wayman: Phase Transformations, ASM, Metals Park, OH, 1970, p. 59. 6. Y.C. Liu and H.I. Aaronson: Acta Metall., 1970, vol. 18, p. 845. 7. K.R. Kinsman, E. Eichen, and H.I. Aaronson: Metall. Trans. A, 1975, vol. 6A, p. 303. 8. J.M. Rigsbee and H.I. Aaronson: Acta Metall.. 1979, vol. 27, p. 365. 9. K.C. Russell. M.G. Hall, K.R. Kinsman, and H.I. Aaronson: Metall. Trans., 1974, vol. 5, p. 1503. 10. R. LeHoullier. G. Begin, and A. Dube: Metall. Trans., 1971, vol. 2, p. 2645. 1I. J.M. Oblak and R. F. Hehemann: Transformation and Hardenability in Steels, Climax Molybdenum Co., Ann Arbor, MI. 1967, p. 15. 12. J. Friedel: Dislocations, Addison-Wesley, Reading, MA, 1964, p. 454. 13. L. Kaufman, S. V. Radcliffe, and M. Cohen: Decomposition of Austenite by Diffusional Processes, Interscience, New York, NY, 1962, p. 313. 14. H.I. Aaronson, H. A. Domain, and G. M. Pound: Trans. TMS-AIME, 1966, vol. 236, p. 753. 15. J.M. Rigsbee, A. Guha, and H. I. Aaronson: unpublished research. 16. L.M. Pevzner, T.D. Kubyushina, G.M. Rovenskii, and A.I. Samoilov: Soviet Metallography and Treatment of Metals, 1956, no. 11, p. 2. 17. R. E Hehemann. K. R. Kinsman, and H. I. Aaronson: Metall. Trans., 1972, vol. 3, p. 1077. 18. D.N. Shackleton and P.M. Kelly: Acta Metall., 1967. vol. 15, p. 979. 19. D.H. Huang and G. Thomas: Metall. Trans. A, 1977, vol. 8A. p. 1661. 20. H. K. D. H. Bhadeshia: Acta Metall., 1980, vol. 28, p. 1103. 21. F.K. LeGoues, H. I. Aaronson, Y. W. Lee, and G. J. Fix: Proceedings of an International Conference on Solid-Solid Phase Tran~sformations,
TMS-AIME, 1983. p. 427. 22. H.I. Aaronson, M.R. Plichta, G.W. Franti, and K.C. Russell: Metall. Trans. A, 1978, vol. 9A, p. 363. 23. W. E Lange Ill and H.I. Aaronson: Metall. Trans. A, in press. 24. J.W. Gibbs: Collected Works, Yale University Press, New Haven, CT, 1948. II00--VOLUME 17A, JUNE 1986
25. G.R. Srinivasan and C.M. Wayman: Acta Metall., 1968, vol. 16, p. 609. 26. A. E Acton and M. Bevis: Mat. Sci. Eng., 1979/70, vol. 5, p. 701. 27. N.H.D. Ross and A.G. Crocker: Acta Metall., 1981, vol. 29. p. 991. 28. C.M. Wayman: Advances in Materials Research, 1969, vol. 3, p. 147. 29. K.R. Kinsman
Data Loading...
