Solving multi-criteria optimization problem in submerged arc welding consuming a mixture of fresh flux and fused slag
- PDF / 161,700 Bytes
- 8 Pages / 595.276 x 790.866 pts Page_size
- 116 Downloads / 193 Views
ORIGINAL ARTICLE
Solving multi-criteria optimization problem in submerged arc welding consuming a mixture of fresh flux and fused slag Saurav Datta & Asish Bandyopadhyay & Pradip Kumar Pal
Received: 17 June 2006 / Accepted: 30 August 2006 / Published online: 17 November 2006 # Springer-Verlag London Limited 2006
Abstract In the present work, application of the Taguchi method in combination with grey relational analysis has been applied for solving multiple criteria (objective) optimization problem in submerged arc welding (SAW). A grey relational grade evaluated with grey relational analysis has been adopted to reveal an optimal parameter combination in order to obtain acceptable features of weld quality characteristics in submerged arc bead-on-plate welding. The idea of slag utilization, in subsequent runs, after mixing it with fresh unmelted flux, has been introduced. The parentage of slag in the mixture of fresh flux and fused flux (slag) has been denoted as slag-mix%. Apart from two conventional process parameters: welding current and flux basicity index, the study aimed at using varying percentages of slag-mix, treated as another process variable, to show the extent of acceptability of using slagmix in conventional SAW processes, without sacrificing any characteristic features of weld bead geometry and HAZ, within the experimental domain. The quality characteristics associated with bead geometry and HAZ were bead width, reinforcement, depth of penetration and HAZ width.
S. Datta (*) Department of Mechanical Engineering, B. P. Poddar Institute of Management and Technology, 137, VIP Road, Poddar Vihar, Kolkata, West Bengal 700052, India e-mail: [email protected] A. Bandyopadhyay : P. K. Pal Department of Mechanical Engineering, Jadavpur University, Kolkata, West Bengal 700032, India A. Bandyopadhyay e-mail: [email protected] P. K. Pal e-mail: [email protected]
Using grey relational grade as performance index, we have performed parametric optimization yielding the desired features of bead geometry and HAZ. Predicted results have been verified with confirmatory experiments, showing good agreement. This proves the utility of the proposed method for quality improvement in SAW process and provides the maximum (optimum) amount of slag-mix that can be consumed in the SAW process without any negative effect on characteristic features of the quality of the weldment in terms of bead geometry. Keywords submerged arc welding . Taguchi method . grey relational analysis . optimization
1 Introduction Submerged arc welding is a versatile metal joining process in industry. It is a multi-variable, multi-objective metal fabrication process characterized by the use of granulated fusible flux which covers the molten weld pool during operation. This arrangement facilitates slower cooling rate, prevents atmospheric contamination into the weld pool and improves both mechanical properties and metallurgical characteristics of the weld bead as well as heat affected zone (HAZ). The acceptable quality characteristics of a wel
Data Loading...
