Texture Evolution of a Fine-Grained Mg Alloy at Dynamic Strain Rates
AMX602 (Mg-6%Al-0.5%Mn-2%Ca) is a high strength Mg alloy that was manufactured by the spinning water atomization process (SWAP) and extruded into a plate geometry. The processing produces an alloy with a weak rolling texture (for Mg) and grains between 0.
- PDF / 24,699,267 Bytes
- 285 Pages / 595.35 x 807.87 pts Page_size
- 43 Downloads / 161 Views
Dan Casem · Leslie Lamberson · Jamie Kimberley Editors
Dynamic Behavior of Materials, Volume 1 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics
Conference Proceedings of the Society for Experimental Mechanics Series
Series Editor Kristin B. Zimmerman, Ph.D. Society for Experimental Mechanics Bethel, CT, USA
More information about this series at http://www.springer.com/series/8922
Dan Casem • Leslie Lamberson • Jamie Kimberley Editors
Dynamic Behavior of Materials, Volume 1 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics
Editors Dan Casem Army Research Laboratory Aberdeen, MD, USA
Leslie Lamberson Drexel University Philadelphia, PA, USA
Jamie Kimberley New Mexico Inst. of Mining & Technology Socorro, NM, USA
ISSN 2191-5644 ISSN 2191-5652 (electronic) Conference Proceedings of the Society for Experimental Mechanics Series ISBN 978-3-319-41131-6 ISBN 978-3-319-41132-3 (eBook) DOI 10.1007/978-3-319-41132-3 Library of Congress Control Number: 2016952246 # The Society for Experimental Mechanics, Inc. 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG Switzerland
Preface
Dynamic Behavior of Materials represents one of ten volumes of technical papers presented at the 2016 SEM Annual Conference & Exposition on Experimental and Applied Mechanics organized by the Society for Experimental Mechanics and held in Orlando, FL, on June 6–9, 2016. The complete proceedings also includes volumes on: Challenges in Mechanics of Time-Dependent Materials; Advancement of Optical Methods in Experimental Mechanics; Experimental and Applied Mechanics; Micro and Nanomechanics; Mechanics of Biological Systems and Materials; Mechanics of Composite & Multifunctional Materials; Fracture, Fatigue, Failure and Damage Evolution; Residual Stress, Thermomechanics & Infrared Imaging, Hybrid
