• PDF / 551,505 Bytes
• 6 Pages / 612 x 792 pts (letter) Page_size
• 49 Downloads / 264 Views

DOWNLOAD

REPORT

1211-R11-38

TiO2 nanotube films via Laser Ablation for Solar cells. Sanjaya D. Perera, Kenneth J. Balkus Jr.∗ Department of Chemistry and the Alan G. MacDiarmid Nanotech Institute, The University of Texas at Dallas, 800 west Campbell Road, Richardson, TX 75080-3021, USA

ABSTRACT Titanium dioxide (TiO2) nanostructures are widely employed in photoconversion processes. In particular titanium dioxide nanotubes (TNTs) have shown promise in many applications including photocatalysis and solar cells. While there are methods for making TNT films the preparation of high surface area small diameter (

Recommend Documents

Colloidal CuInS 2 Based Nanocrystals /TiO 2 Nanotube Arrays Composite Solar Cells Fabrication and Testing

197 15 6MB

Raster Scanning Laser and UV Processing of nanocrystalline TiO 2 Films for Sintering in Dye Solar Cells: Device Performa

163 103 579KB

Highly Ordered TiO 2 Nanotube Array Improves Dye-Sensitized Solar Cells

167 40 423KB

Nanoparticle Layers Transformed from Ordered TiO 2 Nanotube Arrays and Dye-Sensitized Solar Cells

201 111 824KB

Non-equilibrium Growth Processes of Porous TiO 2 Nanocrystal-films during Pulsed Laser Ablation

154 34 4MB

Laser Ablation of CuInSe 2 and CuIn/GaSe 2 Alloys For Solar Cell Applications

193 40 346KB

Diffusion-Limited Recombination in Dye-Sensitized TiO 2 Solar Cells

184 70 591KB

TiO 2 Nanoarray Photoanode Improves Dye-Sensitized Solar Cells

223 1 190KB

Electrochemical catalytic behavior for platinum functionalized TiO 2 nanotube arrays in PEM fuel cells

187 30 6MB

Fabrication of silicon nanowire based solar cells using TiO 2 /Al 2 O 3 stack thin films

168 4 1MB

Amorphic Diamond Films Produced By Laser Ablation

379 100 820KB

Fabrication of TiO 2 Nanobelt Network for Dye-Sensitized Solar Cells

169 62 513KB