Utilization of Experimental Data in Elastic Multibody Simulation: Case Study on the Ampair 600 Turbine Blade
The development of detailed elastic multibody models is a standard practice for the transient analysis of complex mechanical and mechatronic systems. With the constant increase in complexity of modern engineering problems, however, the development of repr
- PDF / 35,824,216 Bytes
- 413 Pages / 595.35 x 807.87 pts Page_size
- 28 Downloads / 152 Views
Brandon Dilworth Michael Mains Editors
Topics in Modal Analysis & Testing, Volume 8 Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020
Conference Proceedings of the Society for Experimental Mechanics Series Series Editor Kristin B. Zimmerman, Ph.D. Society for Experimental Mechanics, Inc., Bethel, CT, USA
The Conference Proceedings of the Society for Experimental Mechanics Series presents early findings and case studies from a wide range of fundamental and applied work across the broad range of fields that comprise Experimental Mechanics. Series volumes follow the principle tracks or focus topics featured in each of the Society’s two annual conferences: IMAC, A Conference and Exposition on Structural Dynamics, and the Society’s Annual Conference & Exposition and will address critical areas of interest to researchers and design engineers working in all areas of Structural Dynamics, Solid Mechanics and Materials Research
More information about this series at http://www.springer.com/series/8922
Brandon Dilworth • Michael Mains Editors
Topics in Modal Analysis & Testing, Volume 8 Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020
Editors Brandon Dilworth Massachusetts Institute of Technology Lincoln Laboratory Lexington, MA, USA
Michael Mains University of Cincinnati Cincinnati, Ohio, USA
ISSN 2191-5644 ISSN 2191-5652 (electronic) Conference Proceedings of the Society for Experimental Mechanics Series ISBN 978-3-030-47716-5 ISBN 978-3-030-47717-2 (eBook) https://doi.org/10.1007/978-3-030-47717-2 © The Society for Experimental Mechanics, Inc. 2021 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG. The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface
Topics
