Application of Design for Additive Manufacturing to an Automotive Component
Additive manufacturing plays an important role in the modern era for fabricating complex geometry with less wastage. It has the ability to manufacture complex geometry product at low cost and less weight. The design of product for achieving the former-sai
- PDF / 16,639,383 Bytes
- 334 Pages / 453.543 x 683.15 pts Page_size
- 11 Downloads / 249 Views
Amaresh Chakrabarti Manish Arora Editors
Industry 4.0 and Advanced Manufacturing Proceedings of I-4AM 2019
Lecture Notes in Mechanical Engineering Series Editors Francisco Cavas-Martínez, Departamento de Estructuras, Universidad Politécnica de Cartagena, Cartagena, Murcia, Spain Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Francesco Gherardini, Dipartimento di Ingegneria, Università di Modena e Reggio Emilia, Modena, Italy Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Vitalii Ivanov, Department of Manufacturing Engineering Machine and Tools, Sumy State University, Sumy, Ukraine Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Justyna Trojanowska, Poznan University of Technology, Poznan, Poland
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering—quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor of your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. The books of the series are submitted for indexing to Web of Science.
More information about this series at http://www.springer.com/series/11236
Amaresh Chakrabarti Manish Arora •
Editors
Industry 4.0 and Advanced Manufacturing Proceedings of I-4AM 2019
123
Editors Amaresh Chakrabarti Centre for Product Design and Manufacturing Indian Institute of Science Bengaluru, Karnataka, India
Manish Arora Centre for Product Design and Manufacturing Indian Institute of Science Bengaluru, Karnataka, India
ISSN 2195-4356 ISSN 2195-4364 (electronic) Lecture Notes in Mechanical Engineering ISBN 978-981-15-5688-3 ISBN 978-981-15-5689-0 (eBook) https://doi.org/10.1007/978-981-15-5689-0 © The Editor(s) (if applicable) and Th
Data Loading...