Application of Multi Materials Additive Manufacturing Technique in the Design and Manufacturing of Hand Orthoses
The objective of this study is to demonstrate the possibility of obtaining a completely customized orthosis through the use of multi-material 3-D printing technique. Additive manufacturing with multi-material enables to print objects with two different ma
- PDF / 41,710,011 Bytes
- 505 Pages / 439.37 x 666.142 pts Page_size
- 77 Downloads / 278 Views
Klaus Miesenberger Roberto Manduchi Mario Covarrubias Rodriguez Petr Penˇáz (Eds.)
Computers Helping People with Special Needs 17th International Conference, ICCHP 2020 Lecco, Italy, September 9–11, 2020 Proceedings, Part II
Lecture Notes in Computer Science Founding Editors Gerhard Goos Karlsruhe Institute of Technology, Karlsruhe, Germany Juris Hartmanis Cornell University, Ithaca, NY, USA
Editorial Board Members Elisa Bertino Purdue University, West Lafayette, IN, USA Wen Gao Peking University, Beijing, China Bernhard Steffen TU Dortmund University, Dortmund, Germany Gerhard Woeginger RWTH Aachen, Aachen, Germany Moti Yung Columbia University, New York, NY, USA
12377
More information about this series at http://www.springer.com/series/7409
Klaus Miesenberger Roberto Manduchi Mario Covarrubias Rodriguez Petr Peňáz (Eds.) •
•
•
Computers Helping People with Special Needs 17th International Conference, ICCHP 2020 Lecco, Italy, September 9–11, 2020 Proceedings, Part II
123
Editors Klaus Miesenberger Institute Integriert Studieren JKU Linz Linz, Austria Mario Covarrubias Rodriguez Dipartimento di Meccanica Politecnico di Milano Milan, Italy
Roberto Manduchi Jack Baskin School of Engineering UC Santa Cruz Santa Cruz, CA, USA Petr Peňáz Support Centre for Students with Special Needs Masaryk University Brno Brno, Czech Republic
ISSN 0302-9743 ISSN 1611-3349 (electronic) Lecture Notes in Computer Science ISBN 978-3-030-58804-5 ISBN 978-3-030-58805-2 (eBook) https://doi.org/10.1007/978-3-030-58805-2 LNCS Sublibrary: SL3 – Information Systems and Applications, incl. Internet/Web, and HCI © Springer Nature Switzerland AG 2020 12 chapters are licensed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/). For further details see licence information in the chapters. This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and