Concrete
The Pin Foundation Diamond Pier is a precast concrete pier and steel pin system that provides a solid foundation that reaches deep into the ground without digging. The pier components are light enough to hand-carry to the site, and the installation is sim
- PDF / 670,502 Bytes
- 16 Pages / 486 x 648 pts Page_size
- 21 Downloads / 299 Views
Concrete U LT R A PE R F O R M I N G P R O D U C T
DIAMOND PIER
N° 316600 - 001
L O W - I M P A C T F O U N D AT I O N T E C H N O L O G Y
The Pin Foundation Diamond Pier is a precast concrete pier and steel pin system that provides a solid foundation that reaches deep into the ground without digging. The pier components are light enough to hand-carry to the site, and the installation is simple, requiring only hand tools and a few minutes of time. The development of Pin Foundation’s unique technology began more than two decades ago in an effort to design foundation systems that would eliminate excavation and minimize the disruption of the existing soil’s state and natural topography. These soils have developed over many centuries and provide critical natural storage and filtering for rainfall. Digging alters these soil characteristics, and Diamond Piers offer a cost-effective solution for installing a reliable and durable foundation without degrading streams and water quality. The piers can be installed in any native soil or compacted fill—even in frost, expansive, or saturated soils often deemed too marginal for traditional construction. Predetermined pin lengths are driven through slots in the pier that has been installed at grade. There are two pier sizes: The DP-50 and DP-100, weighing fifty and one hundred pounds, respectively. The DP-50 can achieve a maximum capacity of four thousand pounds, while the DP-100 can achieve a maximum capacity of eight thousand pounds. The soils encountered and the length of the pin installed will determine the pier’s capacity. CONTENTS
TYPES / SIZES
C O N TA C T
Concrete, steel, PVC
DP-50: 10.5" (27 cm) square at midpoint, 11" (28 cm) high, 50 lbs (23 kg), pin length varies; DP-100: 13" (33 cm) square at midpoint, 14" (35.5 cm) high, 100 lbs (45 kg), pin length varies
Pin Foundations, Inc. 8607 58th Avenue NW Gig Harbor, WA 98332 Tel: 253-858-8809 www.pinfoundations.com pinfound@pinfoundations. com
A P P L I C AT I O N S
Building foundations
E N V I R O N M E N TA L
Minimal impact on existing soils
T R A N S M AT E R I A L
16
U LT R A H I G H – P E R F O R M A N C E C O N C R E T E
Ductal is a new material technology that offers ductility, strength, and durability while providing moldable products with a quality surface. Compressive strengths reach up to 30,000 psi (200 MPa) and flexural strengths reach up to 7,000 psi (50 MPa). With Ductal, it is possible to create thinner sections, longer spans, and higher structures, which are lighter, more graceful and innovative in geometry, and have superior durability and impermeability against corrosion, abrasion, and impact. Ductal provides precasters with opportunities to improve many existing products and to manufacture new lines of products that will compete with stainless steel, cast iron, ceramics, and others. By utilizing its superior properties, Ductal solutions can eliminate passive reinforcing steel and experience reduced global construction costs, formwork, labor, and maintenance, resulting in benefits such as imp
Data Loading...
