Consolidation of collodal suspensions
- PDF / 358,657 Bytes
- 6 Pages / 420.48 x 639 pts Page_size
- 68 Downloads / 185 Views
CONSOLIDATION OF COLLOIDAL SUSPENSIONS WEI-HENG SHIH,* SEONG IL KIM,* WAN Y. SHIH,* CHRISTOPHER H. SCHILLING,*t and ILHAN A. AKSAY
"Department
of Materials Science and Engineering; and Advanced Materials Technology Center, Washington Technology Centers, University of Washington, Seattle, WA 98195 tPacific Northwest Laboratory, 1 Richland, WA 99352
INTRODUCTION A key step in the processing of ceramics is the consolidation of powders into engineered shapes. Colloidal processing uses solvents (usually water) and dispersants to break up powder agglomerates in suspension and thereby reduce the pore size in a consolidated compact. However, agglomeration and particle rearrangement leading to pore enlargement can still occur during drying. Therefore, it is beneficial to consolidate the compact as densely as possible during the suspension stage. The consolidation techniques of pressure filtration and centrifugation were studied and the results are reported in this paper. In particular, the steady-state pressure-density relationship was studied, and information was obtained regarding the consolidation process, the microstructure, and the average density profile of consolidated cakes. We found that the compaction processes in these two consolidation methods are quite different. In general, a consolidated cake is a particulate network made up of many structural units which are fractal objects formed during aggregation in the suspension. In pressure filtration, compaction is a process of breaking up the fractal structural units in the particulate network by applied pressure; the resulting particle rearrangement is produced by overcoming energetic barriers which are related to the packing density of the compact. Recently, we performed Monte Carlo simulations on a cluster-cluster aggregation model with restructuring, and found the exponential relationship between2 pressure and density is indeed the result of the breaking up of the fractal structural units. On the other hand, in centrifugation, compaction involves the rearrangement of the fractal structural units without breaking them so that the self-similar nature of the aggregates is preserved. Furthermore, we calculated density profiles from the bottom to the top of the consolidated cakes by solving the local static force balance equation in the continuum particulate network. In pressure filtration of alumina and boehmite, the cakes are predicted to have uniform density. The results of y-ray densitometry 3 on a pressure-filtrated alumina cake confirmed this prediction. In contrast, in centrifugation, the density profiles are predicted to show significant variation for cakes on the order of one centimeter high. Moreover, the pressure-filtered boehmite cakes showed no cracking during drying. This indicated that pressure filtration is a good consolidation technique for nanometer-sized particles such as boehmite. The improved drying property is probably a result of a minimal shrinkage due to the formation of higher packing densities during filtration.
PRESSURE FILTRATION Press
Data Loading...
