Correction to: Comparison of Flow Estimators for Rotary Blood Pumps: An In Vitro and In Vivo Study
- PDF / 211,940 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 94 Downloads / 202 Views
Annals of Biomedical Engineering, Vol. 47, No. 8, August 2019 (Ó 2019) p. 1827 https://doi.org/10.1007/s10439-019-02295-0
Correction
Correction to: Comparison of Flow Estimators for Rotary Blood Pumps: An In Vitro and In Vivo Study ANASTASIOS PETROU,1 DANIEL KUSTER,1 JONGSEOK LEE,2 MIRKO MEBOLDT,1 and MARIANNE SCHMID DANERS1 1
Product Development Group Zurich, Department of Mechanical and Process Engineering, ETH Zurich, 8092 Zurich, Switzerland; and 2German Aerospace Center (DLR), Institute of Robotics and Mechatronics, 82234 Wessling, Germany
Correction to: Annals of Biomedical Engineering (2018) https://doi.org/10.1007/s10439-018-2106-7 This erratum is to correct the third row of Table 2, where parameter h2h is missing in the original article. TABLE 2. Static and dynamic parameters identified based on static and dynamic experiments (Table 1, Dataset A of original article). Estimator
(3) PIPB
Static coefficients
Dynamic coefficients
h1 ¼ 5:809 106 mmHg rpm2 h2h ¼ 0:703 h3h ¼
mmHg
L=min=s
mmHg 2
ðL=minÞ
1:791 mmHg L=min 7
h2l ¼ 4:324 10 h3l ¼
L ¼ 0:6084
mmHg 2
ðL=minÞ rpm2
4:570 mmHg L=min
PIPB pump-inlet pressure-based.
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Address correspondence to Marianne Schmid Daners, Product Development Group Zurich, Department of Mechanical and Process Engineering, ETH Zurich, 8092 Zurich, Switzerland. Electronic mail: [email protected] The original article can be found online at https://doi.org/10. 1007/s10439-018-2106-7.
1827 0090-6964/19/0800-1827/0
Ó 2019 Biomedical Engineering Society
Data Loading...
