Correction to: Texture Analysis of Additively Manufactured Ti-6Al-4V Deposited Using Different Scanning Strategies
- PDF / 150,635 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 67 Downloads / 161 Views
Correction to: Texture Analysis of Additively Manufactured Ti-6Al-4V Deposited Using Different Scanning Strategies MARIA J. QUINTANA, MATTHEW J. KENNEY, PRIYANKA AGRAWAL, and PETER C. COLLINS
https://doi.org/10.1007/s11661-020-06082-8 Ó The Minerals, Metals & Materials Society and ASM International 2020
Correction to: METALLURGICAL AND MATERIALS TRANSACTIONS A https://doi.org/10.1007/s11661-020-06040-4
THE following is missing from the Acknowledgments in the original article: Access to the Oak Ridge National Laboratory’s (ORNL) additive manufacturing equipment at ORNL’s Manufacturing Demonstration Facility (MDF) was facilitated by US Department of Energy’s Strategic
MARIA J. QUINTANA is with the Materials Science and Engineering Department, Iowa State University, Ames, IA, 50011 and with the Facultad de Ingenierı´ a, Universidad Panamericana, Augusto Rodin 498, Mexico, 03920, Mexico. MATTHEW J. KENNEY and PETER C. COLLINS are with the Materials Science and Engineering Department, Iowa State University. Contact e-mail: [email protected] PRIYANKA AGRAWAL is with the Department of Materials Science and Engineering, University of North Texas, Denton, TX, 76203, USA. The original article can be found online at https://doi.org/10.1007/ s11661-020-06040-4.
METALLURGICAL AND MATERIALS TRANSACTIONS A
Partnership Projects (SPP) mechanism. More information can be found at https://science.energy.gov/lp/ strategic-partnership-projects. Research sponsored by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Industrial Technologies Program, under contract DE-AC05-00OR22725 with UT-Battelle, LLC.
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Data Loading...
