Design Automation of Cyber-Physical Systems
This book presents the state-of-the-art and breakthrough innovations in design automation for cyber-physical systems.The authors discuss various aspects of cyber-physical systems design, including modeling, co-design, optimization, tools, formal methods,
- PDF / 9,125,244 Bytes
- 292 Pages / 439.43 x 683.15 pts Page_size
- 31 Downloads / 201 Views
ign Automation of Cyber-Physical Systems
Design Automation of Cyber-Physical Systems
Mohammad Abdullah Al Faruque Arquimedes Canedo Editors
Design Automation of Cyber-Physical Systems
123
Editors Mohammad Abdullah Al Faruque University of California, Irvine Irvine, CA, USA
Arquimedes Canedo Siemens Corporate Technology Princeton, NJ, USA
ISBN 978-3-030-13049-7 ISBN 978-3-030-13050-3 (eBook) https://doi.org/10.1007/978-3-030-13050-3 © Springer Nature Switzerland AG 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG. The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Introduction: Research Challenges in the Design Automation of Cyber-Physical Systems Mohammad Abdullah Al Faruque and Arquimedes Canedo
Cyber-physical systems (CPS) are all around us – from smart watches and home automation devices to traffic infrastructure, power grid, and transportation systems. The penetration of CPS into the world is accelerating thanks to better Internet connectivity, power-efficient computation, higher-capacity memory, and software functions. In the past, CPS development was mainly driven by companies. Today, all kinds of people from different backgrounds are proactively creating new CPS thanks to the Internet, crowdfunding, crowdsourcing, availability of inexpensive electronics, software tools, and access to additive manufacturing and other forms of flexible manufacturing. As the complexity of products increases and the timeto-market cycles shrink, CPS design automation tools and methodologies become a necessity. In this book, design automation tools refer to software tools for designing cyber-physical systems. Design automation methodologies refer to workflows where these tools are used by engineers to analyze the CPS along one or more phases of
Data Loading...
