Design Engineering
Normally there are five phases for Oil and Gas Process Plant Engineering as shown in Fig. 1.1. The project budget tolerance target may be decided at the Identify phase or Evaluate phase. Normally it targets that PDP stage, ± 30–50%; Pre-FEED stage, ± 10–3
- PDF / 42,782,347 Bytes
- 912 Pages / 595.35 x 807.87 pts Page_size
- 14 Downloads / 228 Views
Handbook of Engineering Practice of Materials and Corrosion
Handbook of Engineering Practice of Materials and Corrosion
Jung-Chul (Thomas) Eun
Handbook of Engineering Practice of Materials and Corrosion
Jung-Chul (Thomas) Eun Consultant for Multi-Companies Houston, TX, USA
ISBN 978-3-030-36429-8 ISBN 978-3-030-36430-4 https://doi.org/10.1007/978-3-030-36430-4
(eBook)
© Springer Nature Switzerland AG 2020 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors, and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, expressed or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. This Springer imprint is published by the registered company Springer Nature Switzerland AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface
For more than 38 years of experience as an engineer specialized in metallurgy in the oil and gas industry, I have been involved in numerous project executions that are related to different industrial requirements. As I understand that identifying project definition and developing the best engineering practice in compliance with the industrial requirements are laborious process, I found it necessary to have a book that provides an overview of all the requirements of materials and corrosion engineering and decided to put my experience together. This is a guide handbook (Engineering Practice of Materials and Corrosion-“EPMC”) for materials and corrosion engineering and could be useful to experienced engineers who work in the oil and gas, chemical, and petrochemical industries. This book provides background knowledge and rationale of the engineering data based on the industrial requirements, such as codes, standards, local regulations, specifications, manuals, and common company guidelines. Throughout this book, I intended to provide simplified applications, options, and comparisons of such requirements in an integrated view. Engineers and technicians are often faced with several different factors when working on projects, such as saf
