Design of Adhesive Joints Under Humid Conditions
This book describes most recent advances and limitations concerning design of adhesive joints under humid conditions and discusses future trends. It presents new approaches to predict the failure load after exposure to load, temperature and humidity
- PDF / 9,419,638 Bytes
- 185 Pages / 453.543 x 683.15 pts Page_size
- 106 Downloads / 215 Views
Lucas F. M. da Silva Chiaki Sato Editors
Design of Adhesive Joints Under Humid Conditions
Advanced Structured Materials Volume 25
Series Editors Andreas Öchsner Lucas F. M. da Silva Holm Altenbach
For further volumes: http://www.springer.com/series/8611
Lucas F. M. da Silva Chiaki Sato •
Editors
Design of Adhesive Joints Under Humid Conditions
123
Editors Lucas F. M. da Silva Department of Mechanical Engineering University of Porto Porto Portugal
ISSN 1869-8433 ISBN 978-3-642-37613-9 DOI 10.1007/978-3-642-37614-6
Chiaki Sato Precision and Intelligence Laboratory Tokyo Institute of Technology Yokohama Japan
ISSN 1869-8441 (electronic) ISBN 978-3-642-37614-6 (eBook)
Springer Heidelberg New York Dordrecht London Library of Congress Control Number: 2013944519 Ó Springer-Verlag Berlin Heidelberg 2013 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface
Adhesive joints are nowadays a major method of joining in many industries. The pioneers were the aerospace engineers but other more traditional industries such as the automotive engineers are increasingly using adhesives to bond their innovative designs and materials. The joint mechanics are well understood in static conditions, however, concerning other modes of loading such as impact, vibration and
Data Loading...
