Designing Pilot Projects as Boundary Objects A Brazilian Case Study
This book describes a collaborative Design Pilot Project held in Brazil (called MODU.Lares) involving micro and small enterprises and other actors in the furniture sector. The experience was based on an action research method and evaluated by using a
- PDF / 3,226,051 Bytes
- 119 Pages / 439.37 x 666.142 pts Page_size
- 15 Downloads / 250 Views
Francesco Zurlo Viviane dos Guimarães Alvim Nunes
Designing Pilot Projects as Boundary Objects A Brazilian Case Study in the Promotion of Sustainable Design 123
SpringerBriefs in Applied Sciences and Technology PoliMI SpringerBriefs
Editorial Board Barbara Pernici, Politecnico di Milano, Milano, Italy Stefano Della Torre, Politecnico di Milano, Milano, Italy Bianca M. Colosimo, Politecnico di Milano, Milano, Italy Tiziano Faravelli, Politecnico di Milano, Milano, Italy Roberto Paolucci, Politecnico di Milano, Milano, Italy Silvia Piardi, Politecnico di Milano, Milano, Italy
More information about this series at http://www.springer.com/series/11159 http://www.polimi.it
Francesco Zurlo Viviane dos Guimarães Alvim Nunes
Designing Pilot Projects as Boundary Objects A Brazilian Case Study in the Promotion of Sustainable Design
13
Francesco Zurlo DESIGN Department Politecnico di Milano Milan Italy
Viviane dos Guimarães Alvim Nunes School of Architecture, Urbanism and Design (FAUeD) Federal University of Uberlândia (UFU) Uberlândia Minas Gerais Brazil
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2282-2577 ISSN 2282-2585 (electronic) PoliMI SpringerBriefs ISBN 978-3-319-23140-2 ISBN 978-3-319-23141-9 (eBook) DOI 10.1007/978-3-319-23141-9 Library of Congress Control Number: 2015947112 Springer Cham Heidelberg New York Dordrecht London © The Author(s) 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media (www.springer.com)
Preface
Systemic changes that aim at more efficient and sustainable patterns of production and consumption demand a collaborative Design approach. Collaboration, and the resulting shared knowledge, is a key pillar for developing and implementing strategic innovations towards sustainability and valued co-production. Indeed, collaborative networks can be valuable to induce the i
Data Loading...
