Development of a Surge Tank Set-up and Its Utilisation in the Diesel Engine for NOX Emission Reduction
Modern vehicles are the major source of air pollution and diesel engines are the at most pollutant with emission of NOx ranging from 500 to 1000 ppm. NOx is the most harmful pollutant amongst various other emission such as HC, CO2, CO, PM and soot. In thi
- PDF / 14,787,343 Bytes
- 307 Pages / 439.37 x 666.142 pts Page_size
- 19 Downloads / 168 Views
L. M. Das Naveen Kumar Rohit Singh Lather Pramod Bhatia Editors
Emerging Trends in Mechanical Engineering Select Proceedings of ICETMIE 2019
Lecture Notes in Mechanical Engineering Series Editors Francisco Cavas-Martínez, Departamento de Estructuras, Universidad Politécnica de Cartagena, Cartagena, Murcia, Spain Fakher Chaari, National School of Engineers, University of Sfax, Sfax, Tunisia Francesco Gherardini, Dipartimento di Ingegneria, Università di Modena e Reggio Emilia, Modena, Italy Mohamed Haddar, National School of Engineers of Sfax (ENIS), Sfax, Tunisia Vitalii Ivanov, Department of Manufacturing Engineering Machine and Tools, Sumy State University, Sumy, Ukraine Young W. Kwon, Department of Manufacturing Engineering and Aerospace Engineering, Graduate School of Engineering and Applied Science, Monterey, CA, USA Justyna Trojanowska, Poznan University of Technology, Poznan, Poland
Lecture Notes in Mechanical Engineering (LNME) publishes the latest developments in Mechanical Engineering—quickly, informally and with high quality. Original research reported in proceedings and post-proceedings represents the core of LNME. Volumes published in LNME embrace all aspects, subfields and new challenges of mechanical engineering. Topics in the series include: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical Structures and Stress Analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluid Mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision Engineering, Instrumentation, Measurement Materials Engineering Tribology and Surface Technology
To submit a proposal or request further information, please contact the Springer Editor of your location: China: Dr. Mengchu Huang at [email protected] India: Priya Vyas at [email protected] Rest of Asia, Australia, New Zealand: Swati Meherishi at [email protected] All other countries: Dr. Leontina Di Cecco at [email protected] To submit a proposal for a monograph, please check our Springer Tracts in Mechanical Engineering at http://www.springer.com/series/11693 or contact [email protected] Indexed by SCOPUS. All books published in the series are submitted for consideration in Web of Science.
More information about this series at http://www.springer.com/series/11236
L. M. Das Naveen Kumar Rohit Singh Lather Pramod Bhatia •
•
Editors
Emerging Trends in Mechanical Engineering Select Proceedings of ICETMIE 2019
123
•
Editors L. M. Das Department of Mechanical Engineering Indian Institute of Technology Delhi New Delhi, India
Naveen Kumar Department of Mechanical Engineering Delhi Technological University (DTU) New Delhi, India
Rohit Singh Lather Department of Mechanical Engineering The NorthCap University Gurugram, India
Pramod Bhatia Department of Mechanical Engineering The Nort
Data Loading...
