Enterprise Interoperability IV Making the Internet of the Future for
Enterprise Interoperability is the ability of an enterprise or organisation to work with other enterprises or organisations without special effort. It is now recognised that interoperability of systems and thus sharing of information is not sufficient to
- PDF / 14,655,705 Bytes
- 451 Pages / 439.37 x 666.142 pts Page_size
- 95 Downloads / 243 Views
Keith Popplewell • Jenny Harding Raul Poler • Ricardo Chalmeta Editors
Enterprise Interoperability IV Making the Internet of the Future for the Future of Enterprise
123
Organiser
Promoter
Editors Professor Keith Popplewell Coventry University Future Manufacturing Applied Research Centre CV1 5FB Coventry UK [email protected] Doctor Jenny Harding Loughborough University Mechanical and Manufacturing Engineering Leicestershire LE11 3TU UK [email protected]
Professor Raul Poler Polytechnic University of Valencia Research Centre on Production Management and Engineering EPSA Pza Ferrandiz y Carbonell, 2 03801 Alcoy Spain [email protected] Doctor Ricardo Chalmeta Universidad Jaume I. Av Sos Banyant Grupo de Integración y Re-Ingeniería de Sistemas DLSI s/n 12071 Castellon Spain [email protected]
ISBN 978-1-84996-256-8 e-ISBN 978-1-84996-257-5 DOI 10.1007/978-1-84996-257-5 Springer London Dordrecht Heidelberg New York British Library Cataloguing in Publication Data A catalogue record for this book is available from the British Library Library of Congress Control Number: 2010923777 © Springer-Verlag London Limited 2010 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the Copyright, Designs and Patents Act 1988, this publication may only be reproduced, stored or transmitted, in any form or by any means, with the prior permission in writing off the publishers, or in the case of reprographic reproduction in accordance with the terms of licences issued by the Copyright Licensing Agency. Enquiries concerning reproduction outside those terms should be sent to the publishers. The use of registered names, trademarks, etc. in this publication does not imply, even in the absence off a specific statement, that such names are exempt from the relevant laws and regulations and therefore free for general use. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made. Cover design: eStudioCalamar, Figueres/Berlin Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface Keith Popplewell1, Jenny Harding2, Raul Poler3, Ricardo Chalmeta4 1
2
3
4
Future Manufacturing Applied Research Centre, Coventry University CV1 5FB Coventry (United Kingdom) General Chairperson of I-ESA’10 [email protected] Mechanical and Manufacturing Engineering Loughborough University Leicestershire LE11 3TU (United Kingdom) General co-Chairperson of I-ESA’10 [email protected] Research Centre on Production Management and Engineering Polytechnic University of Valencia EPSA. Pza Ferrandiz y Carbonell, 2, 03801 Alcoy (Spain) Chairperson of the I-ESA’10 International Programme Committee [email protected] Grupo de Integración y Re-Ingeniería de Sistemas. DLSI. Universidad Jaume I. Av Sos Banyant s/n 12071 Castellon (Spain) co-Chairperson of the I
Data Loading...
