Erratum to: Influence of Laser Processing Parameters on Microstructure and Corrosion Kinetics of Laser-Treated ZE41 Magn
- PDF / 305,133 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 86 Downloads / 203 Views
Erratum to: Influence of Laser Processing Parameters on Microstructure and Corrosion Kinetics of Laser-Treated ZE41 Magnesium Alloy P. CHAKRABORTY BANERJEE, R.K. SINGH RAMAN, Y. DURANDET, and G. MCADAM
DOI: 10.1007/s11661-017-4328-y Ó The Minerals, Metals & Materials Society and ASM International 2017
Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A, VOLUME 44A, MAY 2013, PP. 2346–57 DOI: 10.1007/S11661-012-1590-X
DUE to an error by the authors, Reference 29, P.C. Banerjee, R.K.S. Raman, Y. Durandet, and G. McAdam: Corros. Sci., 2011, vol. 53 (4), p. 1505 should have been cited as a source of the data for Figure 6.
P. CHAKRABORTY BANERJEE, Post-doc Fellow, is with the Department of Mechanical and Aerospace Engineering, Monash University, Melbourne, VIC 3800, Australia. R.K. SINGH RAMAN, Professor, is with the Department of Chemical Engineering, Monash University, and also with the Department of Mechanical and Aerospace Engineering, Monash University. Contact e-mail: raman. [email protected] Y. DURANDET, Research Fellow, is with the Industrial Research Institute Swinburne (IRIS), Swinburne University of Technology, Hawthorn, VIC 3122, Australia. G. McADAM, Senior Research Scientist, is with the Defence Science and Technology Organisation, Fishermans Bend, VIC 3207, Australia. The online version of the original article can be found under doi: 10.1007/s11661-012-1590-x.
METALLURGICAL AND MATERIALS TRANSACTIONS A
Data Loading...
