Erratum to: Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams
- PDF / 38,572 Bytes
- 1 Pages / 584.957 x 782.986 pts Page_size
- 70 Downloads / 180 Views
doi: 10.1557/JMR.2005.0048, Published by Materials Research Society, 1 February 2005 In Di Maio and Roberts1, Equation (3) had an incorrect term listed in the bracketed portion of the equation. The correct equation is as follows: i2 w2 wb3 b 2 w4 hw I¼ þ ðb yÞ þ y þ bw þ 2 6 12 288 4
REFERENCE 1. D. Di Maio and S.G. Roberts: Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams. J Mater. Res. 20(2), 299–302 (2005). doi: 10.1557/JMR.2005.0048.
; ð3Þ
The editor regrets this error.
DOI: 10.1557/jmr.2017.84 Downloaded from https:/www.cambridge.org/core. IP address: 80.82.77.83, Apr 28, 20172017 at 12:34:01,Ó subject to the Cambridge terms of use, available at J. Mater. Res., Vol. 32, No.on6,16Mar Materials ResearchCore Society 2017 https:/www.cambridge.org/core/terms. https://doi.org/10.1557/jmr.2017.84
1211
Data Loading...
