Erratum to: Metallography of Sputter-Deposited SS304+Al Coatings
- PDF / 190,371 Bytes
- 1 Pages / 595.276 x 790.866 pts Page_size
- 85 Downloads / 209 Views
ERRATUM
Erratum to: Metallography of Sputter-Deposited SS304+Al Coatings Uma M. R. Seelam • C. Suryanarayana
Published online: 19 November 2013 Ó Springer Science+Business Media New York and ASM International 2013
Erratum to: Metallogr. Microstruct. Anal. DOI 10.1007/s13632-013-0087-3 In the caption for Figure 2(a), BCT-r should instead be Tetragonal-r. Below is the corrected version of the caption:
The online version of the original article can be found under doi: 10.1007/s13632-013-0087-3. U. M. R. Seelam C. Suryanarayana (&) Department of Mechanical and Aerospace Engineering, University of Central Florida, Orlando, FL 32816-2450, USA e-mail: [email protected] Present Address: U. M. R. Seelam National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, Japan
123
Fig. 2 (a) XRD patterns of the SS304 target and SS304?0Al coating. While the target shows predominantly the FCC-c phase, the coating shows the presence of the BCC a-ferrite and Tetragonal-r phases. (b) Detailed indexing of the XRD pattern of the coating giving the indices of the different diffraction peaks from the a (marked inside rectangles) and r phases (all other indices)
Data Loading...
