Erratum to: Microstructure Evolution and Rapid Solidification Behavior of Blended Nickel-Based Superalloy Powders Fabric
- PDF / 586,984 Bytes
- 2 Pages / 593.972 x 792 pts Page_size
- 6 Downloads / 223 Views
DOI: 10.1007/s11661-016-3556-x Ó The Minerals, Metals & Materials Society and ASM International 2016
Erratum to: METALLURGICAL AND MATERIALS TRANSACTIONS A DOI 10.1007/s11661-016-3505-8
IN the original article the captions for Figures 7, 8, and 9 were correct, but the images were incorrect. Following are the correct images with their captions:
YUAN TIAN, Ph.D. Student, RAYNALD GAUVIN, Professor, and MATHIEU BROCHU, Associate Professor, are with the Department of Mining and Materials Engineering, McGill University, Montreal, QC H3A 0C5, Canada. Contact e-mail: mathieu.brochu@ mcgill.ca The online version of the original article can be found under doi:10.1007/s11661-016-3505-8. Article published online May 18, 2016 3782—VOLUME 47A, JULY 2016
METALLURGICAL AND MATERIALS TRANSACTIONS A
Fig. 7—Measurement of dendrite tip radius in top clads: (a) low magnification dendritic structure; (b) estimation of dendrite tip radius (15 nm); (c) low magnification dendritic structure; and (d) estimation of dendrite tip radius (30 nm).
Fig. 8—KGT model describing the dendrite tip radius as a function of SFV.
METALLURGICAL AND MATERIALS TRANSACTIONS A
Fig. 9—Effective partition coefficient of B as a function of SFV.
VOLUME 47A, JULY 2016—3783
Data Loading...
