Friction Welding Thermal and Metallurgical Characteristics
This book provides insight into the thermal analysis of friction welding incorporating welding parameters such as external, duration, breaking load, and material properties. The morphological and metallurgical changes associated with the resulting weld si
- PDF / 2,485,290 Bytes
- 79 Pages / 439.37 x 666.142 pts Page_size
- 40 Downloads / 264 Views
Bekir Sami Yilbas Ahmet Z. Sahin
Friction Welding Thermal and Metallurgical Characteristics
SpringerBriefs in Applied Sciences and Technology Manufacturing and Surface Engineering
Series editor Joao Paulo Davim, Aveiro, Portugal
For further volumes: http://www.springer.com/series/10623
Bekir Sami Yilbas Ahmet Z. Sahin •
Friction Welding Thermal and Metallurgical Characteristics
123
Bekir Sami Yilbas Mechanical Engineering Department King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia
Ahmet Z. Sahin King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia
ISSN 2191-530X ISSN 2191-5318 (electronic) ISBN 978-3-642-54606-8 ISBN 978-3-642-54607-5 (eBook) DOI 10.1007/978-3-642-54607-5 Springer Heidelberg New York Dordrecht London Library of Congress Control Number: 2014933787 The Author(s) 2014 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. Exempted from this legal reservation are brief excerpts in connection with reviews or scholarly analysis or material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Duplication of this publication or parts thereof is permitted only under the provisions of the Copyright Law of the Publisher’s location, in its current version, and permission for use must always be obtained from Springer. Permissions for use may be obtained through RightsLink at the Copyright Clearance Center. Violations are liable to prosecution under the respective Copyright Law. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. While the advice and information in this book are believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein. Printed on acid-free paper Springer is part of Springer Science+Business Media (www.springer.com)
Preface
Friction welding can be used widely in industry because of its precision of operation, high processing speed, and low cost. Friction welding has advantages of incomplete molten state of the welded parts at the weld interface region. This is particularly important for welding of dissimilar materials, in which case narrow heat affected zone is favorable. To improve the end-product quali
Data Loading...
