Holistic Simulation of Geotechnical Installation Processes Benchmark
This book examines in detail the entire process involved in implementing geotechnical projects, from a well-defined initial stress and deformation state, to the completion of the installation process. The individual chapters provide the fundamental k
- PDF / 15,549,496 Bytes
- 255 Pages / 453.543 x 683.15 pts Page_size
- 68 Downloads / 185 Views
Theodoros Triantafyllidis Editor
Holistic Simulation of Geotechnical Installation Processes Benchmarks and Simulations
Lecture Notes in Applied and Computational Mechanics Volume 80
Series editors Friedrich Pfeiffer, Technische Universität München, Garching, Germany e-mail: [email protected] Peter Wriggers, Universität Hannover, Hannover, Germany e-mail: [email protected]
About this Series This series aims to report new developments in applied and computational mechanics—quickly, informally and at a high level. This includes the fields of fluid, solid and structural mechanics, dynamics and control, and related disciplines. The applied methods can be of analytical, numerical and computational nature.
More information about this series at http://www.springer.com/series/4623
Theodoros Triantafyllidis Editor
Holistic Simulation of Geotechnical Installation Processes Benchmarks and Simulations
123
Editor Theodoros Triantafyllidis Karlsruhe Institute of Technology (KIT) Karlsruhe, Baden-Württemberg Germany
ISSN 1613-7736 ISSN 1860-0816 (electronic) Lecture Notes in Applied and Computational Mechanics ISBN 978-3-319-23158-7 ISBN 978-3-319-23159-4 (eBook) DOI 10.1007/978-3-319-23159-4 Library of Congress Control Number: 2015938753 Springer Cham Heidelberg New York Dordrecht London © Springer International Publishing Switzerland 2016 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media (www.springer.com)
Preface
In a previous textbook with similar title, the midterm results of the research group GEOTECH on the numerical and physical modeling of geotechnical installation processes have been presented. In this volume emphasis is given to the simulation strategies of the benchmark problems. The holistic simulation of geotechnical installation processes takes into account the entire installation of structural elements into the ground for foundatio
Data Loading...
