Holistic Simulation of Geotechnical Installation Processes Numerical
The book provides suitable methods for the simulations of boundary value problems of geotechnical installation processes with reliable prediction for the deformation behavior of structures in static or dynamic interaction with the soil. It summarizes the
- PDF / 16,089,249 Bytes
- 255 Pages / 453.543 x 683.15 pts Page_size
- 86 Downloads / 209 Views
Th. Triantafyllidis Editor
Holistic Simulation of Geotechnical Installation Processes Numerical and Physical Modelling
Lecture Notes in Applied and Computational Mechanics Volume 77
Series editors Friedrich Pfeiffer, Technische Universität München, Garching, Germany e-mail: [email protected] Peter Wriggers, Universität Hannover, Hannover, Germany e-mail: [email protected]
About this Series This series aims to report new developments in applied and computational mechanics—quickly, informally and at a high level. This includes the fields of fluid, solid and structural mechanics, dynamics and control, and related disciplines. The applied methods can be of analytical, numerical and computational nature.
More information about this series at http://www.springer.com/series/4623
Th. Triantafyllidis Editor
Holistic Simulation of Geotechnical Installation Processes Numerical and Physical Modelling
123
Editor Th. Triantafyllidis Institute for Soil and Rock Mechanics The Karlsruhe Institute of Technology Karlsruhe, Baden-Württemberg Germany
ISSN 1613-7736 ISSN 1860-0816 (electronic) Lecture Notes in Applied and Computational Mechanics ISBN 978-3-319-18169-1 ISBN 978-3-319-18170-7 (eBook) DOI 10.1007/978-3-319-18170-7 Library of Congress Control Number: 2015938753 Springer Cham Heidelberg New York Dordrecht London © Springer International Publishing Switzerland 2015 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. Printed on acid-free paper Springer International Publishing AG Switzerland is part of Springer Science+Business Media (www.springer.com)
Preface
This textbook summarizes the midterm results of the research group GEOTECH dealing with the holistic consideration of geotechnical installation processes. In this sense, the entire process for the realization of a geotechnical construction project starting from a well-defined initial stress and deformation state is taken into account. For every subsequent construction stage, as e.g., the vibro-installation
Data Loading...
