Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-depo
- PDF / 347,641 Bytes
- 1 Pages / 612 x 792 pts (letter) Page_size
- 89 Downloads / 194 Views
orrigendum
Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing – CORRIGENDUM Hoejin Kim, Fernando Torres, Md Tariqul Islam, Md Didarul Islam, Luis A. Chavez, Carlos A. Garcia Rosales, Bethany R. Wilburn, Calvin M. Stewart, Juan C. Noveron, Tzu-Liang B. Tseng, and Yirong Lin
doi: https://doi.org/10.1557/mrc.2017.126, Published by Materials Research Society with Cambridge University Press, 8 November 2017 In Kim et al.,1 a calculation error was made in the piezoelectric coefficient d31 for 3D printed MWCNT/BT/PVDF nanocomposites. Output millivolts were used instead of volts in the equation to get the final d31, so all values of d31 should be divided by 1000 to get the correct values. A detailed list of corrections follows: Abstract, line 5: the value 129 pC/N should be 0.13 pC/N. The sentence beginning “Measured d31 of 3D printed. . .” should be deleted. Page 5, right column, paragraph 2, line 7: the values 0.22 to 57.6 pC/N should be 0.002 to 0.058 pC/N. Page 5, right column, paragraph 2, line 13: the values 21.8 (0 wt %-BT) to 129 pC/N (18 wt%-BT) should be 0.022 (0 wt%-BT) to 0.13 pC/N (18 wt%-BT).
974 ▪
Page 5, right column, paragraph 2, line 14: the sentence beginning “The measured d31 of the nanocomposites is comparable. . .” should be deleted. Page 7, left column, paragraph 1, line 6: the value of 129 pC/N should be 0.13 pC/N. Figure 3 is corrected below. The authors regret these errors.
Reference 1. H. Kim, F. Torres, M.T. Islam, M.D. Islam, L.A. Chavez, C.A. Garcia Rosales, B. R. Wilburn, C.M. Stewart, J.C. Noveron, T.-L.B. Tseng, and Y. Lin: Increased piezoelectric response in functional nanocomposites through multiwall carbon nanotube interface and fused-deposition modeling three-dimensional printing. MRS Communications (2017). https://doi. org/10.1557/mrc.2017.126
MRS COMMUNICATIONS • VOLUME 7 • ISSUE80.82.77.83, 4 • www.mrs.org/mrc Downloaded from https://www.cambridge.org/core. IP address: on 29 Jan 2018 at 23:14:17, subject to the Cambridge Core terms of use, available at https://www.cambridge.org/core/terms. https://doi.org/10.1557/mrc.2017.129
Data Loading...
