Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures
This volume, in which on-site measurements of concrete and masonry structures by NDT techniques are comprehensively summarized, focuses on the visualization procedure of the results measured. The research and its outcomes presented in this book treat appl
- PDF / 9,094,766 Bytes
- 185 Pages / 453.543 x 683.15 pts Page_size
- 34 Downloads / 180 Views
Masayasu Ohtsu Editor
Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures State-of-the-Art Report of the RILEM Technical Committee 239-MCM
RILEM State-of-the-Art Reports
RILEM STATE-OF-THE-ART REPORTS Volume 20 RILEM, The International Union of Laboratories and Experts in Construction Materials, Systems and Structures, founded in 1947, is a non-governmental scientific association whose goal is to contribute to progress in the construction sciences, techniques and industries, essentially by means of the communication it fosters between research and practice. RILEM’s focus is on construction materials and their use in building and civil engineering structures, covering all phases of the building process from manufacture to use and recycling of materials. More information on RILEM and its previous publications can be found on www.RILEM.net. The RILEM State-of-the-Art Reports (STAR) are produced by the Technical Committees. They represent one of the most important outputs that RILEM generates—high level scientific and engineering reports that provide cutting edge knowledge in a given field. The work of the TCs is one of RILEM’s key functions. Members of a TC are experts in their field and give their time freely to share their expertise. As a result, the broader scientific community benefits greatly from RILEM’s activities. RILEM’s stated objective is to disseminate this information as widely as possible to the scientific community. RILEM therefore considers the STAR reports of its TCs as of highest importance, and encourages their publication whenever possible. The information in this and similar reports is mostly pre-normative in the sense that it provides the underlying scientific fundamentals on which standards and codes of practice are based. Without such a solid scientific basis, construction practice will be less than efficient or economical. It is RILEM’s hope that this information will be of wide use to the scientific community.
More information about this series at http://www.springer.com/series/8780
Masayasu Ohtsu Editor
Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures State-of-the-Art Report of the RILEM Technical Committee 239-MCM
123
Editor Masayasu Ohtsu Graduate School of Engineering Kyoto University Kyoto Japan
ISSN 2213-204X RILEM State-of-the-Art Reports ISBN 978-94-017-7605-9 DOI 10.1007/978-94-017-7606-6
ISSN 2213-2031
(electronic)
ISBN 978-94-017-7606-6
(eBook)
Library of Congress Control Number: 2016937349 © RILEM 2016 No part of this work may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, microfilming, recording or otherwise, without written permission from the Publisher, with the exception of any material supplied specifically for the purpose of being entered and executed on a computer system, for exclusive use by the purchaser of the work. Permission for use must always be obtained from the owner of the copyright: RILEM. Printed
Data Loading...
