Integration of Thermal Infrared and Synthetic Aperture Radar Images to Identify Geothermal Steam Spots Under Thick Veget
- PDF / 9,056,407 Bytes
- 14 Pages / 595.276 x 790.866 pts Page_size
- 95 Downloads / 193 Views
Original Paper
Integration of Thermal Infrared and Synthetic Aperture Radar Images to Identify Geothermal Steam Spots Under Thick Vegetation Cover Asep Saepuloh ,1,5 Rezky Heidi Saputro,2 Mohamad Nur Heriawan,3 and Dwiyogarani Malik4 Received 30 March 2020; accepted 19 September 2020
Identifying physical properties of geothermal features such as surface temperature and roughness is crucial for geothermal assessment, hydrology, and environmental studies. Surface temperature and roughness-related rock properties strongly influence the thermal infrared and back-scattering intensities, respectively, of synthetic aperture radar (SAR) images. This study aimed to identify geothermal steam spots based on the surface temperature and roughness of altered surfaces, mud pools, and hot springs in tropical conditions. The thermal emissivity separation method was adopted to calculate kinetic temperature using the thermal infrared (TIR) of the advanced spaceborne thermal emission and reflection radiometer (ASTER) data as well as ground temperature data. Surface temperatures calculated by the thermal emissivity separation method were corrected using measured ground temperatures to eliminate the effects of atmospheric absorption, thermal inertia of materials, and/or diurnal temperature in the images. In addition, the linear fitting method was applied to obtain the final surface roughness model based on the calculated determination coefficient (R2) between the initial surface roughness model derived by Sentinel-1A SAR and field data. The highest R2 between surface roughness values from Sentinel-1A SAR and field data were selected to calculate spatially the surface roughness of the Wayang Windu Geothermal Field, West Java, Indonesia. The satellite imagery and field measurements showed that surface temperature and roughness features correlate with each other, and high and low thermal features correlate with high and low surface roughness values, respectively. Accordingly, we integrated the TIR and SAR data to propose the thermal resistivity index (TRI) as an indicator of the hydrothermal fluid paths to the surface. Low TRI was encountered at geothermal features and intersections of subsurface faults, which indicated weak zones that radiate heat from the subsurface to the surface. KEY WORDS: Geothermal, Thermal, Roughness, Radar, Sentinel-1A.
1
Faculty of Earth Sciences and Technology, Bandung Institute of Technology, Jl. Ganesha No. 10, Bandung 40132, Indonesia. 2 Batam Indonesia Free Zone Authority (BIFZA), Jl. Jenderal Sudirman No. 1, Batam, Kepulauan Riau 29432, Indonesia. 3 Faculty of Mining and Petroleum Engineering, Bandung Institute of Technology, Jl. Ganesha No. 10, Bandung 40132, Indonesia. 4 Star Energy Geothermal (Wayang Windu) Ltd, Jl. Let. Jen. S. Parman Kav. 62-63, Jakarta Barat 11410, Indonesia. 5 To whom correspondence should be addressed; e-mail: [email protected]
INTRODUCTION Surface features of geothermal systems serve as indicators of subsurface hydrothermal circulation. The occurrence of surface features in
Data Loading...
