Introduction to Multiphase Flow Basic Concepts, Applications and Mod
This book is the maiden volume in a new series devoted to lectures delivered through the annual seminars “Short Courses on Multiphase Flow,” held primarily at ETH Zurich continuously since 1984. The Zurich short courses, presented by prominent specialists
- PDF / 7,029,725 Bytes
- 221 Pages / 453.543 x 683.15 pts Page_size
- 99 Downloads / 355 Views
George Yadigaroglu Geoffrey F. Hewitt Editors
Introduction to Multiphase Flow Basic Concepts, Applications and Modelling
Zurich Lectures on Multiphase Flow Series editors George Yadigaroglu, ETH Zurich, Zurich, Switzerland Sanjoy Banerjee, The City College of New York, New York, USA Geoffrey F. Hewitt, Imperial College London, London, UK
The series tracks critical research and engineering practice imparted through the Zurich Short Courses on Multiphase Flows. Multiphase flows occur in very many situations of industrial importance, including conventional or nuclear power plants, the oil and gas industry, chemical processing plants; as well as in biomedical applications. Understanding the basic laws governing the behavior of multiphase flows—such as flows of air and water, steam and water, oil and natural gas—, and producing methods, tools, codes, and best practices capable of predicting their behavior are crucial to engineering in these areas. The Zurich Lectures on Multiphase Flows brings together concise volumes that cover the field starting from the very fundamentals, such as void fraction, pressure drop, and heat transfer in multiphase flows; governing equations, closure laws, phenomenological modeling, correlations, experimental techniques, to the more advanced and specialized topics including non-equilibrium flows, instabilities, numerical methods for multiphase flows, applications to multiphase flows in nuclear power plants, in the oil-and-gas industry, and related technologies. The monographs appearing in the Zurich Lecture Series comprise a critical knowledge base particularly relevant to a range of engineering and scientific problems in industrial/commercial R&D, facility operation/optimization, product quality assurance, as well as in academic/ biomedical research settings.
More information about this series at http://www.springer.com/series/15392
George Yadigaroglu Geoffrey F. Hewitt •
Editors
Introduction to Multiphase Flow Basic Concepts, Applications and Modelling
123
Editors George Yadigaroglu ETH Zurich Zurich Switzerland
Geoffrey F. Hewitt Department of Chemical Engineering Imperial College London London UK
Zurich Lectures on Multiphase Flow ISBN 978-3-319-58717-2 ISBN 978-3-319-58718-9 DOI 10.1007/978-3-319-58718-9
(eBook)
Library of Congress Control Number: 2017939918 © Springer International Publishing AG 2018 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective
Data Loading...
