Lamb-Wave Based Structural Health Monitoring in Polymer Composites

The book focuses especially on the application of SHM technology to thin walled structural systems made from carbon fiber reinforced plastics. Here, guided elastic waves (Lamb-waves) show an excellent sensitivity to structural damages so that they are in

  • PDF / 20,784,458 Bytes
  • 476 Pages / 439.42 x 683.15 pts Page_size
  • 21 Downloads / 306 Views

DOWNLOAD

REPORT


Rolf Lammering Ulrich Gabbert Michael Sinapius Thomas Schuster

Peter Wierach Editors

Lamb-Wave Based Structural Health Monitoring in Polymer Composites

Research Topics in Aerospace

More information about this series at http://www.springer.com/series/8625

Rolf Lammering • Ulrich Gabbert • Michael Sinapius • Thomas Schuster • Peter Wierach Editors

Lamb-Wave Based Structural Health Monitoring in Polymer Composites

123

Editors Rolf Lammering Institute of Mechanics Helmut-Schmidt-University University of the Federal Armed Forces Hamburg Hamburg, Germany Michael Sinapius Institute of Adaptronics and Function Integration Braunschweig University of Technology Braunschweig, Germany

Ulrich Gabbert Institute of Mechanics Otto von Guericke University Magdeburg Magdeburg, Germany

Thomas Schuster Faculty of Mathematics Saarland University SaarbrRucken, Germany

Peter Wierach DLR - German Aerospace Center Braunschweig, Germany

ISSN 2194-8240 Research Topics in Aerospace ISBN 978-3-319-49714-3 DOI 10.1007/978-3-319-49715-0

ISSN 2194-8259 (electronic) ISBN 978-3-319-49715-0 (eBook)

Library of Congress Control Number: 2017943490 © Springer International Publishing AG 2018 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland

Preface

The book at hand covers parts of the emerging research area Structural Health Monitoring (SHM). It is based on the results which our research groups achieved in the course of a joint project in the field of SHM of layered fiber-reinforced composites on the basis of guided waves after their excitation by piezoelectric actuators. Thus, the book compiles the developed approaches from the basics to engineering applications