Machining of Hard Materials A Comprehensive Approach to Experimentat
This book presents the potential applications of hard materials as well as the latest trends and challenges in machining hard materials. Models for online monitoring to adjust parameters to obtain desired machining characteristics (i.e. reverse modelling)
- PDF / 4,663,459 Bytes
- 137 Pages / 439.371 x 666.143 pts Page_size
- 13 Downloads / 196 Views
Manjunath Patel G. C. Ganesh R. Chate Mahesh B. Parappagoudar Kapil Gupta
Machining of Hard Materials A Comprehensive Approach to Experimentation, Modeling and Optimization 123
SpringerBriefs in Applied Sciences and Technology Manufacturing and Surface Engineering
Series Editor Joao Paulo Davim , Department of Mechanical Engineering, University of Aveiro, Aveiro, Portugal
This series fosters information exchange and discussion on all aspects of manufacturing and surface engineering for modern industry. This series focuses on manufacturing with emphasis in machining and forming technologies, including traditional machining (turning, milling, drilling, etc.), non-traditional machining (EDM, USM, LAM, etc.), abrasive machining, hard part machining, high speed machining, high efficiency machining, micromachining, internet-based machining, metal casting, joining, powder metallurgy, extrusion, forging, rolling, drawing, sheet metal forming, microforming, hydroforming, thermoforming, incremental forming, plastics/composites processing, ceramic processing, hybrid processes (thermal, plasma, chemical and electrical energy assisted methods), etc. The manufacturability of all materials will be considered, including metals, polymers, ceramics, composites, biomaterials, nanomaterials, etc. The series covers the full range of surface engineering aspects such as surface metrology, surface integrity, contact mechanics, friction and wear, lubrication and lubricants, coatings an surface treatments, multiscale tribology including biomedical systems and manufacturing processes. Moreover, the series covers the computational methods and optimization techniques applied in manufacturing and surface engineering. Contributions to this book series are welcome on all subjects of manufacturing and surface engineering. Especially welcome are books that pioneer new research directions, raise new questions and new possibilities, or examine old problems from a new angle. To submit a proposal or request further information, please contact Dr. Mayra Castro, Publishing Editor Applied Sciences, via [email protected] or Professor J. Paulo Davim, Book Series Editor, via [email protected].
More information about this subseries at http://www.springer.com/series/10623
Manjunath Patel G. C. Ganesh R. Chate Mahesh B. Parappagoudar Kapil Gupta •
•
•
Machining of Hard Materials A Comprehensive Approach to Experimentation, Modeling and Optimization
123
Manjunath Patel G. C. Department of Mechanical Engineering PES Institute of Technology and Management Shivamogga, India Mahesh B. Parappagoudar Department of Mechanical Engineering Padre Conceicao College of Engineering Verna, Goa, India
Ganesh R. Chate Department of Mechanical Engineering KLS Gogte Institute of Technology Belgaum, India Kapil Gupta Department of Mechanical and Industrial Engineering Technology University of Johannesburg Doornfontein, Johannesburg, South Africa
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISSN 2365-8223 ISSN 2365-82
Data Loading...
