Mechanical strength characteristics of fiber-reinforced pond ash for pavement application
- PDF / 2,565,552 Bytes
- 12 Pages / 595.276 x 790.866 pts Page_size
- 37 Downloads / 158 Views
TECHNICAL PAPER
Mechanical strength characteristics of fiber‑reinforced pond ash for pavement application Sudhakar Mogili1 · Ashfaq G. Mohammed1 · Heeralal Mudavath1 · Kalyan Kumar Gonavaram1 Received: 4 March 2020 / Accepted: 8 June 2020 © Springer Nature Switzerland AG 2020
Abstract The pavement construction sector throughout the world is facing a major challenge of non-availability of suitable construction materials. On the other side, many waste/sub-products are being generated from manufacturing/production units causing environmental pollution. One of such waste materials is pond ash produced from thermal electric power plants, which can be utilized as an alternative construction material in place of traditional materials. In this context, an attempt was made on fiber-reinforced pond ash as subbase layer of flexible pavements to understand its engineering behavior by conducting static (California bearing ratio, CBR) and dynamic (repeated load triaxial, RLT) tests. Randomly distributed polypropylene fibers of various proportions were used in pond ash as reinforcement inclusions. The test results were analyzed to address the influence of fiber on conventional parameters of pond ash such as CBR, resilient modulus (MR), and permanent strain (ϵp). Also, the influence of confining (σc) and deviatoric stress (σd) levels on MR as well as ϵp with load cycles have been investigated for both unreinforced and reinforced pond ash. The results obtained have shown that the inclusion of fiber improves the CBR, MR and ϵp characteristics of the pond ash. With an increase in stress levels (σc and σd), the MR of reinforced pond ash increased compared to non-reinforced ash. Irrespective of the fiber content in pond ash, permanent strain values were increased with an increase in the number of loading cycles and cyclic deviatoric stresses. However, with the introduction of fiber, the rate of strain development in pond ash was reduced significantly. Furthermore, the experimentally obtained MR and ϵp values were validated against existing models established by previous researchers. From the above findings, it can be concluded that fiber-reinforced pond ash can be used effectively in pavement layer applications. Keywords Pond ash · Fiber · Pavement, CBR, resilient modulus · Permanent strain
Introduction and background With the rapid growth in urbanization, the demand for conventional materials in the civil engineering works has reached an unprecedented way. This issue is more acute in the road sector due to its heavy reliance on naturally available traditional materials such as sand, gravel, and crushed * Sudhakar Mogili [email protected] Ashfaq G. Mohammed [email protected] Heeralal Mudavath [email protected] Kalyan Kumar Gonavaram [email protected] 1
Department of Civil Engineering, National Institute of Technology Warangal, Warangal 506004, Telangana, India
aggregates [1]. On the other hand, the mining and manufacturing industries facing a challenge of wastes/by-products disposal. Apart from that, some o
Data Loading...
