Metal Sprays and Spray Deposition
This book describes and illustrates metal spray and spray deposition from the process engineering, metallurgical, and application viewpoints. The authors include step-by-step fundamental information for the metal spray process and detail current engineeri
- PDF / 27,354,244 Bytes
- 569 Pages / 439.43 x 683.15 pts Page_size
- 93 Downloads / 218 Views
al Sprays and Spray Deposition
Metal Sprays and Spray Deposition
Hani Henein • Volker Uhlenwinkel • Udo Fritsching Editors
Metal Sprays and Spray Deposition
Editors Hani Henein Advanced Materials and Processing Lab University of Alberta Edmonton, AB, Canada
Volker Uhlenwinkel Foundation Institute of Materials Science University of Bremen Bremen, Germany
Udo Fritsching Foundation Institute of Materials Science University of Bremen Bremen, Germany
ISBN 978-3-319-52687-4 ISBN 978-3-319-52689-8 DOI 10.1007/978-3-319-52689-8
(eBook)
Library of Congress Control Number: 2017944585 © Springer International Publishing AG 2017 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations. Printed on acid-free paper This Springer imprint is published by Springer Nature The registered company is Springer International Publishing AG The registered company address is: Gewerbestrasse 11, 6330 Cham, Switzerland
Preface
This compendium of knowledge in metal spray and spray deposition processes summarizes the technical and scientific state-of-the-art metal treatment and manufacturing via droplet and spray processes to form near-net-shaped components. It is hoped that established production areas and fields such as spray forming (SF), and also emerging fields like additive manufacturing (AM), may be inspired in an economical and ecological sense in developments of new technical approaches. We are grateful for the contributions of all authors of the chapters in this book. The sharing of their knowledge and experiences in this field is acknowledged. Without them, this book would not have been possible. This book would not have seen the light of day without the assistance of some colleagues and students. In particular, the assistance of Paul Gronau, Evan Chow, and Sining Li was invaluable. We hope you will enjoy reading and find this book of value for years to come. Edmonton, AB, Can
