Performance evaluation of a U-shaped heat exchanger containing hybrid Cu/CNTs nanofluids: experimental data and modeling
- PDF / 5,689,962 Bytes
- 19 Pages / 595.276 x 790.866 pts Page_size
- 39 Downloads / 159 Views
Performance evaluation of a U‑shaped heat exchanger containing hybrid Cu/CNTs nanofluids: experimental data and modeling using regression and artificial neural network Heydar Maddah1 · Mahyar Ghazvini2 · Mohammad Hossein Ahmadi3 · Dieu Tien Bui4 · Enio Pedone Bandarr Filho5 Received: 6 December 2019 / Accepted: 25 May 2020 © Akadémiai Kiadó, Budapest, Hungary 2020
Abstract In the current research, viscosity and thermal conductivity of hybrid Cu/CNTs water-based nanofluids were investigated at various concentrations of nanofluid and temperatures. The results demonstrated that although increasing the concentration leads to enhance the thermal conduction coefficient and viscosity, the increase in temperature followed the expected results of increasing thermal conductivity and decreasing viscosity. For the objective of evaluating the function of the U-shaped heat exchanger system, exergy variations concerning different operation conditions of three nanofluid concentrations (0.1, 0.2, and 0.5%) and three different pitches of the spiral strip (2, 3, and 4) were considered. The results showed that in all cases, a rise in Reynolds number would increase heat transfer. Additionally, the presence of a spiral strip resulted in much more increase in turbulent flow; subsequently, an impressive effect on the thermal performance can be obtained. The findings of the exergy efficiency for the U-shaped heat exchanger using hybrid nanofluid in different scenarios indicated that it is improved to 9–17%, and exergy improvement with the ratio of 4 is 23–26% and, for the ratio of 4, obtained 10–12.7%. For predicting the exergy efficiency of the heat exchanger, the designed neural network presented a three-layer model (one input layer, one hidden layer, and one output layer) containing seven neurons in the hidden layer and the leading algorithm of backpropagation Levenberg–Marquardt that anticipates the behavior of the system with a precision of R2 = 0.9967. The investigation of error distribution indicated that the model follows a normal distribution. Keywords Nanofluid · U-shaped heat exchanger · Exergy efficiency · Neural network modeling List of symbols A Heat transfer area (m2) Cp Specific heat (kJ kg−1 °C−1) D Tube diameter (m) * Mohammad Hossein Ahmadi [email protected] * Dieu Tien Bui [email protected] 1
Department of Chemistry, Payame Noor University (PNU), P.O. Box 19395‑3697, Tehran, Iran
2
Department of Ocean and Mechanical Engineering, Florida Atlantic University, Boca Raton, USA
3
Faculty of Mechanical Engineering, Shahrood University of Technology, Shahrood, Iran
4
Institute of Research and Development, Duy Tan University, Da Nang 550000, Viet Nam
5
School of Mechanical Engineering, Federal University of Uberlandia (UFU), Av. Joao Naves de Avila, 2121, Santa Monica, Uberlandia, MG 38408‑514, Brazil
d Nanoparticle diameter (m) Cc Cooled fluid specific heat (kJ kg−1 °C−1) Ch Cooling fluid specific heat (kJ kg−1 °C−1) E Exergy (kJ kg−1) Ec Cooled flow exergy (kJ kg−1) Eh
Data Loading...
