Powder Surface Area and Porosity
The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an
- PDF / 20,029,402 Bytes
- 261 Pages / 439.37 x 666.142 pts Page_size
- 98 Downloads / 205 Views
Powder Technology Series EDITED BY BRIAN SCARLETI
Delft University of Technology The Netherlands
Many materials exist in the form of a disperse system, for example powders, pastes, slurries, emulsions and aerosols. The study of such systems necessarily arises in many technologies but may alternatively be regarded as a separate subject which is concerned with the manufacture, characterization and manipulation of such systems. Chapman and Hall were one of the first publishers to recognize the basic importance of the subject, going on to instigate this series of books. The series does not aspire to define and confine the subject without duplication, but rather to provide a good home for any book which has a contribution to make to the record of both the theory and the application of the subject. We hope that all engineers and scientists who concern themselves with disperse systems will use these books and that those who become expert will contribute further to the series.
Particle Size Measurement T. Allen 4th edn, hardback (041235070 X), 832 pages Powder Surface Area and Porosity S. Lowell and Joan E. Shields 3rd edn, hardback (0412396904), 256 pages Pneumatic Conveying of Solids R.D. Marcus, L.S. Leung, G.E. Klinzing and F. Rizk Hardback (0 412 21490 3), 592 pages Particle Technology Hans Rumpf Translated by F.A. Bull Hardback (0 412 35230 3), 216 pages
Powder Surface Area and Porosity S. LOWELL Quantachrome Corporation, USA
JOAN E. SHIELDS
c. w. Post Campus of Long Island University, USA THIRD EDITION
Springer-Science+Business Media, B.V.
First edition 1979 published as Introduction to Powder Surface Area by John Wiley & Sons Inc., New York Second edition 1984 published as Powder Surface Area and Porosity by Chapman and Hall Ltd Third edition 1991
© 1984,1991 S. Lowell and J.E. Shields Originally published by Chapman and Hall in 1991. Softcover reprint of the hardcover 1st edition 1991 Typeset in 1O/12pt Times by Best-set Typesetter Ltd, Hong Kong ISBN 978-90-481-4005-3 ISBN 978-94-015-7955-1 (eBook) DOI 10.1007/978-94-015-7955-1 Apart from any fair dealing for the purposes of research or private study, or criticism or review, as permitted under the UK Copyright Designs and Patents Act, 1988, this publication may not be reproduced, stored or transmitted, in any form or by any means, without the prior permission in writing of the publishers, or in the case of repro graphic reproduction only in accordance with the terms of the licences issued by the Copyright Licensing Agency in the UK, or in accordance with the terms of licences issued by the appropriate Reproduction Rights Organization outside the UK. Enquiries concerning reproduction outside the terms stated here should be sent to the publishers at the UK address printed on this page. The publisher makes no representation, express or implied, with regard to the accuracy of the information contained in this book and cannot accept any legal responsibility or liability for any errors or omissions that may be made. British Library Cataloguing in Publicatio
Data Loading...
