• PDF / 2,058,619 Bytes
• 7 Pages / 393.3 x 625.5 pts Page_size
• 51 Downloads / 225 Views

DOWNLOAD

REPORT

ABSTRACT Multiphase Mo silicide alloys containing T2 (Mo5SiB 2), Mo3Si and Mo phases were prepared

by both melting & casting (M&C) and powder metallurgical (PM) processes. Glassy phases are observed in PM materials but not in M&C materials. Microstructural studies indicate that the primary phase is Mo-rich solid solution in alloys containing •

Recommend Documents

Influence of microstructure and processing on mechanical properties of advanced Nb-silicide alloys

201 50 347KB

On Mo-9Si-18B Alloys with T 2 -Mo ss eutectic microstructure: Mechanical Properties and Protective Silicide Coating

186 40 2MB

Multiphase Mo-Si-B alloys processed by directional solidification

215 51 300KB

Submicron-grained multiphase TiAlSi alloys: Processing, characterization, and microstructural design

177 32 498KB

Oxidation protective silicide coating on Mo-Si-B alloys

161 43 2MB

Mo and Co Silicide FEAs

178 22 9MB

Processing and Properties of Mo 5 Si 3 Single Crystals and Alloys

183 20 3MB

Ambient- to elevated-temperature fracture and fatigue properties of Mo-Si-B alloys: Role of microstructure

204 16 2MB

Microstructural and mechanical properties of ternary Mo-Si-B alloys resulting from different processing routes

176 86 246KB

Microstructure, Mechanical Properties, and Springback of Ti-Nb Alloys Modified by Mo Addition

173 24 1MB

Microstructure and Mechanical Properties of Laser-Processed Ni-Al-Mo Base Alloys

178 8 2MB

Phase equilibrium and mechanical properties of Cr-Mo-Nb-Si-B alloys Composed of BCC and T 2 -silicide phase

167 27 397KB