Advanced CAD Modeling Explicit, Parametric, Free-Form CAD and Re-eng
The book discusses the theoretical fundamentals of CAD graphics to enhance readers’ understanding of surface modeling and free-form design by demonstrating how to use mathematical equations to define curves and surfaces in CAD modelers. Additionally, it e
- PDF / 10,166,946 Bytes
- 259 Pages / 453.54 x 683.15 pts Page_size
- 48 Downloads / 181 Views
Nikola Vukašinović Jože Duhovnik
Advanced CAD Modeling Explicit, Parametric, Free-Form CAD and Re-engineering
Springer Tracts in Mechanical Engineering Board of editors Seung-Bok Choi, Inha University, Incheon, South Korea Haibin Duan, Beijing University of Aeronautics and Astronautics, Beijing, P.R. China Yili Fu, Harbin Institute of Technology, Harbin, P.R. China Carlos Guardiola, Universitat Politècnica de València, València, Spain Jian-Qiao Sun, University of California, Merced, USA
Springer Tracts in Mechanical Engineering (STME) publishes the latest developments in Mechanical Engineering—quickly, informally and with high quality. The intent is to cover all the main branches of mechanical engineering, both theoretical and applied, including: • • • • • • • • • • • • • • • • •
Engineering Design Machinery and Machine Elements Mechanical structures and stress analysis Automotive Engineering Engine Technology Aerospace Technology and Astronautics Nanotechnology and Microengineering Control, Robotics, Mechatronics MEMS Theoretical and Applied Mechanics Dynamical Systems, Control Fluids mechanics Engineering Thermodynamics, Heat and Mass Transfer Manufacturing Precision engineering, Instrumentation, Measurement Materials Engineering Tribology and surface technology
Within the scopes of the series are monographs, professional books or graduate textbooks, edited volumes as well as outstanding Ph.D. theses and books purposely devoted to support education in mechanical engineering at graduate and postgraduate levels.
More information about this series at http://www.springer.com/series/11693
Nikola Vukašinović Jože Duhovnik •
Advanced CAD Modeling Explicit, Parametric, Free-Form CAD and Re-engineering
123
Nikola Vukašinović University of Ljubljana Ljubljana, Slovenia
Jože Duhovnik University of Ljubljana Ljubljana, Slovenia
ISSN 2195-9862 ISSN 2195-9870 (electronic) Springer Tracts in Mechanical Engineering ISBN 978-3-030-02398-0 ISBN 978-3-030-02399-7 (eBook) https://doi.org/10.1007/978-3-030-02399-7 Library of Congress Control Number: 2018957660 © Springer Nature Switzerland AG 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher no
Data Loading...
