Correction to: Effect of Carbon and Nitrogen on the Hydrogen Embrittlement of 15Cr-15Mn-4Ni-Based Stable Austenitic Stai
- PDF / 514,594 Bytes
- 2 Pages / 593.972 x 792 pts Page_size
- 5 Downloads / 172 Views
https://doi.org/10.1007/s11837-020-04446-4 Ó 2020 The Minerals, Metals & Materials Society
CORRECTION
Correction to: Effect of Carbon and Nitrogen on the Hydrogen Embrittlement of 15Cr-15Mn-4Ni-Based Stable Austenitic Stainless Steels KYUNG-SHIK KIM,1 JEE-HYUN KANG,2 and SUNG-JOON KIM
1,3
1.—Graduate Institute of Ferrous Technology, POSTECH, Pohang 37673, Republic of Korea. 2.—School of Materials Science and Engineering, Institute of Materials Technology, Yeungnam University, Gyeongsan 38541, Republic of Korea. 3.—e-mail: [email protected]
Correction to: JOM, Vol. 72, No. 5, 2020 https://doi.org/10.1007/s11837-020-04108-5 This correction is to correct Fig. 4. The scale bars were incorrect in the original version.
The original article can be found online at https://doi.org/10.1007/ s11837-020-04108-5.
K.-S. Kim, Kang, and S.-J. Kim
Fig. 4. SEM images of side surface of the tensile specimen after deformation with hydrogen pre-charging (condition B). The left row represents C3, which was interrupted at true strain equal to (a) 0.05, (b) 0.1 (c) 0.2, and (d) fractured. The right row is N3, which was interrupted at true strain equal to (e) 0.05, (f) 0.1 (g) 0.2 and (h) fractured. The phase fractions are denoted on the upper right of each image.
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Data Loading...
