Correction to: Experimental and numerical investigation of deformation characteristics during tube spinning
- PDF / 129,896 Bytes
- 1 Pages / 595.276 x 790.866 pts Page_size
- 99 Downloads / 207 Views
CORRECTION
Correction to: Experimental and numerical investigation of deformation characteristics during tube spinning Biplov Kumar Roy 1 & Yannis P. Korkolis 2
&
Yoshio Arai 3 & Wakako Araki 3 & Takafumi Iijima 4 & Jin Kouyama 4
Published online: 10 October 2020 # Springer-Verlag London Ltd., part of Springer Nature 2020
Correction to: The International Journal of Advanced Manufacturing Technology (2020) 110:1851–1867 https://doi.org/10.1007/s00170-020-05864-z The original published article contained a mistake. References 35–42 are numbered incorrectly. The correct list is shown below [35] Zienkiewicz, O.C., and Taylor, R.L., 2000, “The finite element method: solid mechanics,” Vol. 2, Butterworth-Heinemann. [36] Bathe, K.J., 2002, “Finite element methods,” SpringerVerlag, Berlin, Heidelberg. [37] Belytschko, T., Liu, W.K., Moran, B. and Elkhodary, K., 2013, “Nonlinear finite elements for continua and structures,” John Wiley & sons. [38] Banabic, D., 2010, “Sheet metal forming processes: constitutive modelling and numerical simulation,” Springer Science & Business Media.
[39] ABAQUS, 2014, “Theory Manual,” Version 6.14, Simulia, Inc. [40] Roy, B. K., Korkolis, Y. P., Arai, Y., Araki, W., Iijima, T., & Kouyama, J., 2019, “Experimental and finite element investigation of wrinkling during spinning of a thin-walled tube,” Proceedings of the NUMIFORM Conference, pp. 547–550. [41] Hoge, K. G., 1966, “Influence of strain rate on mechanical properties of 6061-T6 aluminum under uniaxial and biaxial states of stress,” Exp Mech, 6(4), pp. 204–211. https://doi. org/10.1007/BF02326150 [42] Manes, A., Peroni, L., Scapin, M., and Giglio, M., 2011, “Analysis of strain rate behavior of an Al 6061 T6 alloy,” Procedia Eng, 10, pp. 3477–3482. https://doi.org/10.1016/j. proeng.2011.04.573
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/ 10.1007/s00170-020-05864-z * Yannis P. Korkolis [email protected] Biplov Kumar Roy [email protected]
1
Graduate School of Science and Engineering, Saitama University, 255 Shimo-ohkubo, Sakura-ku, Saitama 338-8570, Japan
2
Department of Integrated Systems Engineering, The Ohio State University, 234 Baker Systems, 1971 Neil Avenue, Columbus, OH 43210-1271, USA
3
Division of Mechanical Engineering and Science, Graduate School of Science and Engineering, Saitama University, 255 Shimo-ohkubo, Sakura-ku, Saitama 338-8570, Japan
4
Asahi Seisakusho Co., Ltd., 7915 Kake, Iwatsuki-ku, Saitama City, Saitama 339-0078, Japan
Yoshio Arai [email protected] Wakako Araki [email protected] Takafumi Iijima [email protected] Jin Kouyama [email protected]
Data Loading...
