Correction to: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Pr
- PDF / 327,458 Bytes
- 1 Pages / 593.972 x 792 pts Page_size
- 46 Downloads / 140 Views
Correction to: Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures SHAOLOU WEI, LUJUN HUANG, XINTING LI, YANG JIAO, WEI REN, and LIN GENG
https://doi.org/10.1007/s11661-019-05606-1 Ó The Minerals, Metals & Materials Society and ASM International 2019
Correction to: Metallurgical and Materials Transactions A Volume 50A, August 2019 https://doi.org/10.1007/s11661-019-05244-7
IN the original article, there is an error in Figure 1. The unit of Specific strength should be MPa/(gÆcm3). Following is the corrected Figure 1.
Fig. 1—Specific strength vs service temperature for typical structural materials (data excerpted from References 24 and 25).
SHAOLOU WEI is with the School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, P.R. China and also with the Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA. LUJUN HUANG, XINTING LI, YANG JIAO, WEI REN, and LIN GENG are with the School of Materials Science and Engineering, Harbin Institute of Technology. Contact e-mails: [email protected]; [email protected] The original article can be found online at https://doi.org/10.1007/ s11661-019-05244-7.
METALLURGICAL AND MATERIALS TRANSACTIONS A
On page 3636 of the original article, the orientation relationship between TiB and a-Ti should be corrected to ð201ÞTiB k 1110 aTi , 112 TiB k ½0001aTi Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Data Loading...
