Development and Evaluation of Setup Strategies in Printed Circuit Board Assembly
The last decade has seen a rapid extension of electronic control devices for various types of technical products. In modern electronics manufacturing, highly automated assembly systems are used to mount the electronic components onto the printed circuit b
- PDF / 2,117,940 Bytes
- 198 Pages / 419.528 x 595.276 pts Page_size
- 37 Downloads / 200 Views
GABLER EDITION WISSENSCHAFT Produktion und Logistik Herausgegeben von Professor Dr. Wolfgang Domschke, Technische Universität Darmstadt, Professor Dr. Andreas Drexl, Universität Kiel, Professor Dr. Bernhard Fleischmann, Universität Augsburg, Professor Dr. Hans-Otto Günther, Technische Universität Berlin, Professor Dr. Stefan Helber, Universität Hannover, Professor Dr. Karl Inderfurth, Universität Magdeburg, Professor Dr. Thomas Spengler, Universität Braunschweig, Professor Dr. Hartmut Stadtler, Technische Universität Darmstadt, Professor Dr. Horst Tempelmeier, Universität zu Köln, Professor Dr. Gerhard Wäscher, Universität Magdeburg
Kontakt: Professor Dr. Hans-Otto Günther, Technische Universität Berlin, FG BWL – Produktionsmanagement, Wilmersdorfer Str. 148, 10585 Berlin
Diese Reihe dient der Veröffentlichung neuer Forschungsergebnisse auf den Gebieten der Produktion und Logistik. Aufgenommen werden vor allem herausragende quantitativ orientierte Dissertationen und Habilitationsschriften. Die Publikationen vermitteln innovative Beiträge zur Lösung praktischer Anwendungsprobleme der Produktion und Logistik unter Einsatz quantitativer Methoden und moderner Informationstechnologie.
˙Ihsan Onur Yılmaz
Development and Evaluation of Setup Strategies in Printed Circuit Board Assembly With a foreword by Prof. Dr. Hans-Otto Günther
GABLER EDITION WISSENSCHAFT
Bibliographic information published by the Deutsche Nationalbibliothek The Deutsche Nationalbibliothek lists this publication in the Deutsche Nationalbibliografie; detailed bibliographic data are available in the Internet at http://dnb.d-nb.de.
Dissertation Technische Universität Berlin, 2007 D 83
1st Edition 2008 All rights reserved © Gabler | GWV Fachverlage GmbH, Wiesbaden 2008 Editorial Office: Frauke Schindler / Jutta Hinrichsen Gabler is part of the specialist publishing group Springer Science+Business Media. www.gabler.de No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the copyright holder. Registered and/or industrial names, trade names, trade descriptions etc. cited in this publication are part of the law for trade-mark protection and may not be used free in any form or by any means even if this is not specifically marked. Cover design: Regine Zimmer, Dipl.-Designerin, Frankfurt/Main Printed on acid-free paper Printed in Germany ISBN 978-3-8349-1200-8
V
Foreword During the last decade the electronics industry faced growth rates considerably higher than average due to innovative products and the comprehensive use of electronic control devices for almost all types of technical products. Hence, printed circuit board (PCB) assembly can be seen as one of the most dynamic branches of the electronics industry. In modern electronics manufacturing, highly automated assembly systems are used to mount the electronic components at pre-specified locations onto the PCBs. Because of the tr
Data Loading...
