Down Milling Trimming Process Optimization for Carbon Fiber-Reinforced Plastic
This book offers recommendations on the milling processes for the carbon fiber reinforced plastic CFRP/Al2024. Due to the anisotropic and non-homogeneous structure of CFRP and the ductile nature of aluminum, the machining of this material is very challeng
- PDF / 3,983,895 Bytes
- 76 Pages / 439.37 x 666.142 pts Page_size
- 24 Downloads / 214 Views
Saiful Bahri Mohamed Radzuwan Ab Rashid Martini Muhamad · Jailani Ismail
Down Milling Trimming Process Optimization for Carbon FibreReinforced Plastic
SpringerBriefs in Applied Sciences and Technology
SpringerBriefs present concise summaries of cutting-edge research and practical applications across a wide spectrum of fields. Featuring compact volumes of 50 to 125 pages, the series covers a range of content from professional to academic. Typical publications can be: • A timely report of state-of-the art methods • An introduction to or a manual for the application of mathematical or computer techniques • A bridge between new research results, as published in journal articles • A snapshot of a hot or emerging topic • An in-depth case study • A presentation of core concepts that students must understand in order to make independent contributions SpringerBriefs are characterized by fast, global electronic dissemination, standard publishing contracts, standardized manuscript preparation and formatting guidelines, and expedited production schedules. On the one hand, SpringerBriefs in Applied Sciences and Technology are devoted to the publication of fundamentals and applications within the different classical engineering disciplines as well as in interdisciplinary fields that recently emerged between these areas. On the other hand, as the boundary separating fundamental research and applied technology is more and more dissolving, this series is particularly open to trans-disciplinary topics between fundamental science and engineering. Indexed by EI-Compendex, SCOPUS and Springerlink.
More information about this series at http://www.springer.com/series/8884
Saiful Bahri Mohamed Radzuwan Ab Rashid Martini Muhamad Jailani Ismail •
•
Down Milling Trimming Process Optimization for Carbon Fibre-Reinforced Plastic
123
Saiful Bahri Mohamed Universiti Sultan Zainal Abidin Kuala Terengganu, Malaysia
Martini Muhamad Universiti Sultan Zainal Abidin Kuala Terengganu, Malaysia
Radzuwan Ab Rashid Universiti Sultan Zainal Abidin Kuala Terengganu, Malaysia
Jailani Ismail Universiti Sultan Zainal Abidin Kuala Terengganu, Malaysia
ISSN 2191-530X ISSN 2191-5318 (electronic) SpringerBriefs in Applied Sciences and Technology ISBN 978-981-13-1803-0 ISBN 978-981-13-1804-7 (eBook) https://doi.org/10.1007/978-981-13-1804-7 Library of Congress Control Number: 2018949351 © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2019 This work is subject to copyright. All rights are reserved by the Publisher, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission or information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed. The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even
Data Loading...
