• PDF / 159,618 Bytes
• 1 Pages / 612 x 792 pts (letter) Page_size
• 99 Downloads / 220 Views

DOWNLOAD

REPORT

(b)

(a)

,

Recommend Documents

Effects of melt temperature and casting speed on the structure and defect formation during direct-chill casting of an Al

184 33 4MB

Electromagnetic Effects on Solidification Defect Formation in Continuous Steel Casting

229 24 7MB

Influence of Melt Feeding Scheme and Casting Parameters During Direct-Chill Casting on Microstructure of an AA7050 Bille

178 74 1MB

On the Solidification and Structure Formation during Casting of Large Inserts in Ferritic Nodular Cast Iron

183 112 2MB

Capillary puddle vibrations linked to casting-defect formation in planar-flow melt spinning

99 17 347KB

Iron-rich intermetallic phases and their role in casting defect formation in hypoeutectic Al-Si alloys

255 54 3MB

Effect of casting speed on dendrite arm spacing of Mn13 steel continuous casting slab

193 51 2MB

Modeling and Experimental Validation of Rapid Cooling and Solidification during High-Speed Twin-Roll Strip Casting of Al

162 86 759KB

A Comprehensive Analysis of Macrosegregation Formation During Twin-Roll Casting

199 0 3MB

Formation Mechanisms and Microstructure Characterization of Al/Al 3 Ni In-situ Composite by Compound Casting

216 27 1MB

Effect of an Electromagnetic Brake on the Turbulent Melt Flow in a Continuous-Casting Mold

188 11 3MB

A Study for Initial Solidification of Sn-Pb Alloy During Continuous Casting: Part II. Effects of Casting Parameters on I

191 37 6MB