• PDF / 81,466 Bytes
• 2 Pages / 584.957 x 782.986 pts Page_size
• 102 Downloads / 467 Views

DOWNLOAD

REPORT

---

Bulk polycrystalline ceria–doped Al2O3 and YAG ceramics for high-power density laser-driven solid-state white lighting:Effectsof crystallinityandextreme temperatures CORRIGENDUM Elias H. Penilla, Pathikumar Sellappan, Matthew A. Duarte, Andrew T. Wieg, Matthew Wingert, Javier E. Garay doi: https://doi.org/10.1557/jmr.2019.417, Published by Materials Research Society, 07 February 2020. The authors of this article [1] would like to correct the following: (i) The middle initial of Matthew C. Wingert was omitted. (ii) Two in-text citations have been updated for the following sentences due to errors in the reference list: The behavior of Ce:Al2O3 is consistent with the lowtemperature optical behavior of other rare earths doped into oxides, such as Nd- [38, 39] and Er-doped [31] YAG, that exhibit optical 4f to 4f transitions that are shielded from crystal–field interactions by the outer 5d shell. The bulk ceramic Ce:Al2O3 phosphors were produced using an all-solid-state, one-step reaction-densification route using CAPAD [23, 31]. (iii) Errors throughout the references necessitate an updated reference list. Below is the proper reference list, which has also been updated in the original article: 1. P. Pust, P.J. Schmidt, and W. Schnick: A revolution in lighting. Nat. Mater. 14, 454 (2015). 2. J.J. Wierer and J.Y. Tsao: Comparison between blue lasers and light-emitting diodes for future solid-state lighting. Laser Photon. Rev. 7, 963 (2013). 3. V. Bachmann, C. Ronda, and A. Meijerink: Temperature quenching of yellow Ce31 luminescence in YAG: Ce. Chem. Mater. 126, 2077 (2009). 4. R.M. Waxler, G.W. Cleek, I.H. Malitson, M.J. Dodge, and T.A. Hahn: Optical and mechanical properties of some neodymium-doped laser glasses. J. Res. Natl. Bur. Stand., Sect. A 75, 163 (1971).

ª Materials Research Society 2020

5. P.H. Klein and W.J. Croft: Thermal conductivity, diffusivity, and expansion of Y2O3, Y3Al5O12, and LaF3 in the range 77°–300 °K. J. Appl. Phys. 38, 1603 (1967). 6. B. Zhou, W. Luo, S. Liu, S. Gu, M. Lu, Y. Zhang, Y. Fan, W. Jiang, and L. Wang: Enhancing the performance of Ce:YAG phosphor-in-silica-glass by controlling interface reaction. Acta Mater. 130, 289 (2017). 7. K. Waetzig, M. Kunzer, and I. Kinski: Influence of sample thickness and concentration of Ce dopant on the optical properties of YAG:Ce ceramic phosphors for white LEDs. J. Mater. Res. 29, 2138 (2014). 8. C. Cozzan, G. Lheureux, N.O. Dea, E.E. Levin, J. Graser, T.D. Sparks, S. Nakamura, S.P. Denbaars, C. Weisbuch, and R. Seshadri: Stable heat-conducting phosphor composites for high-power laser lighting. ACS Appl. Mater. Interfaces 10, 5673 (2018). 9. K.A. Denault, M. Cantore, S. Nakamura, S.P. DenBaars, and R. Seshadri: Efficient and stable laser-driven white lighting. AIP Adv. 3, 072107 (2013). 10. J. Park, S. Cho, and H. Kwon: Alumnum–ceramic composites for thermal management in energy-conversion systems. Sci. Rep. 8, 17852 (2018). 11. J. Wang, X. Tang, P. Zheng, S. Li, T. Zhou, and R-J. Xie: Thermally self-managing YAG:Ce–Al2O3 color converters enabling high-br