Heat Transfer in Multi-Phase Materials
This book provides a profound understanding, which physical processes and mechanisms cause the heat transfer in composite and cellular materials. It shows models for all important classes of composite materials and introduces into the latest advances.In t
- PDF / 14,706,206 Bytes
- 463 Pages / 439.37 x 666.142 pts Page_size
- 109 Downloads / 232 Views
Series Editors: Prof. Dr. Andreas O¨chsner University of Technology Malaysia, Skudai, Johor, Malaysia Prof. Dr. Holm Altenbach Otto-von-Guericke-University Magdeburg, Germany Prof. Dr. Lucas Filipe Martins da Silva University of Porto, Porto, Portugal
For further volumes: http://www.springer.com/series/8611
.
¨ chsner Graeme E. Murch Andreas O l
Editors
Heat Transfer in Multi-Phase Materials
Editors ¨ chsner Andreas O University of Technology Malaysia Faculty of Mechanical Engineering Department of Solid Mechanics and Design Johor Malaysia
Prof. Dr. Graeme E. Murch University of Newcastle Centre for Mass and Thermal Transport in Engineering Materials School of Engineering Callaghan New South Wales Australia
and The University of Newcastle Centre for Mass and Thermal Transport in Engineering Materials School of Engineering Australia
ISSN 1869-8433 ISBN 978-3-642-04402-1 e-ISBN 978-3-642-04403-8 DOI 10.1007/978-3-642-04403-8 Springer Heidelberg Dordrecht London New York Library of Congress Control Number: 2011933805 # Springer-Verlag Berlin Heidelberg 2011 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations, recitation, broadcasting, reproduction on microfilm or in any other way, and storage in data banks. Duplication of this publication or parts thereof is permitted only under the provisions of the German Copyright Law of September 9, 1965, in its current version, and permission for use must always be obtained from Springer. Violations are liable to prosecution under the German Copyright Law. The use of general descriptive names, registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. Cover design: SPi Publisher Services Printed on acid-free paper Springer is part of Springer ScienceþBusiness Media (www.springer.com)
Preface
In many demanding applications such as automotive or aerospace, common engineering materials reaching their limits and new developments are required to fulfill the increasing demands on performance, characteristics, and functions. The properties of materials can be increased, for example, by combining different materials to achieve better properties than a single constituent or by shaping the material or constituents into a specific structure. Many of these new materials reveal a much more complex behavior than traditional engineering materials due to their advanced structure or composition. The purpose of this book is to cover one of the important physical characteristics, that is thermal properties, in detail from different points of view. This book aims to provide readers not only with a good understanding of the fundamentals but also with an awareness of recent advances in properties determination and applications of multiphase materials. The book contains 14 chapters wr
Data Loading...
